This is a Houndstooth base textile that can be printed as is, or paired with negative modifiers to create a 3D printed textile that is ready to be sewn into a finished product. There are multiple sizes that can be loaded in a variety of different build sizes. Follow the PDF guides for more information, and please reach out to me via Kaizen3DPrints@gmail.com if you have any questions.

Keep in mind that these are oriented the "proper" direction only if the finished surface is the build plates. If you plan on printing these face up, you'll have to mirror the textiles along the X axis.

These textiles are printed at a .24mm layer height, for a total of 3 layers at .72 total height. There is a pause command that is added at the beginning of layer two, where mesh and magnets can be placed before the print is resumed. I print at a 35mm/s first layer speed when working with textiles. The 3mf file should have my settings, as well as pause commands (I use Bambu Studio)

There is also a basic how to Youtube video that is linked to this model.

License Summary: Personal use only unless you hold a Commercial License. No resale or sharing of files. Selling printed models allowed only with an active Commercial License.