Geometric Hexagon Star textile
This is a geometric design that can be printed as a 3D textile to be incorporated in any crafting project - Quilting squares, perhaps? There is an STL and a 3mf file with my printing on fabric settings. The model is .72mm tall at .24mm layer height for a total of 3 layers. If you are using a smaller or larger build plate, this textile can be resized easily by scaling it down in the x and y directions. There is a pause that is added at layer two, where fabric is added. If you are using fabric that is thicker than .24mm, adjust your layer height to be greater than your fabric's thickness. For more information, use the printing on fabric v2 PDF that is included with this model.
If you have any questions, send an email to Kaizen3DPrints@gmail.com
License Summary: Personal use only unless you hold a Commercial License. No resale or sharing of files. Selling printed models allowed only with an active Commercial License.
Geometric Hexagon Star textile
Hand sewn vertical wallet
256x256 PFLAT sheet holder
Massage Roller
Spinning gear fidget ring
Flat band fidget ring
Large TPU foldover bag
Adjustable Strap (48"/122cm max length)
Small Foldover Bag
Customizable Passport Wallet
Tall TPU Bifold Wallet for sewing
Vertical Wallet for Chicago Screws
Square Grid Negative Modifier
Hex Grid Fabric Modifier
Heart Pixel Pattern Textile and Modifiers
Vertical TPU wallet with rivets and grommets
Flippy heart textile and modifiers
Foldable TPU bag sized for Snapmaker U1
Crossed Basket Weave Textile / Modifier
Thin Beaded Textile / Modifier
