Greetings! This file contains everything you need to print your own customizable chain for a plethora of purposes! The main intent for these chains was to be used with the clutches that have recently been uploaded. Why shouldn't we be able to match our chain to our clutch? I have made several iterations of these to find the best ratio so that these chain links are strong, easy to assemble, and interchangeable.

Here are some things to note -

-The original sizes are on the small side so a good amount can be printed on a build plate. You can scale these up along the X and Y axis, but if you scale the Z axis up too much, you may not be able to link these together. -I print these with PLA, but you can print them with PETG if you'd like. While I have tested these with PLA silk, I don't recommend it unless the chain isn't holding much weight. -There are three designs. They can be linked together in whatever order you'd like, they all work together. -There are two types of handles. One is flat, and the other has decorative studs on top of some holes where your fingers can rest. These can also be scaled up or down, depending on your hand/finger size. -The handles can be heat formed over an object to give them a curved shape after they have finished printing. Simply place the handle over something cylindrical (a coffee cup or mason jar) and warm it up with a hair dryer or heat gun until it starts to soften. Form it around the object that you chose (be careful, it may be hot) and let it cool into it's new form. (see photo examples) -I print these at a .2mm layer height with a .4mm nozzle.

If you have any questions, please don't hesitate to contact me at Kaizen3DPrints@gmail.com

License Summary: Personal use only unless you hold a Commercial License. No resale or sharing of files. Selling printed models allowed only with an active Commercial License.