This is a print on fabric, print in place folding box. There are two versions, one that stands up vertically with an autolocking bottom, and another that sits horizontally with an enclosure on each side. There are 5 sizes to accommodate different build plates, from the A1 Mini to the K2 Plus/Prusa XL. I print them at 3 layers tall, with a .4mm nozzle and a .24mm layer height. Please refer to the print on fabric guide included for additional information.

I prefer using illusion mesh for these boxes. Once printed, remove the excess mesh and the mesh inside of the notches. The lids with the notch in the top are held together first, while one of the other parts locks them in place. Follow the sequence with the last part of the lid. You can glue the small flap to the interior of the box for added security. The other side will either be the same closure. The second version of the box has an auto locking bottom - fold the big flap in, followed by the two side flaps, and finally the smaller one will fit inside of the groove and come back on itself. You can either glue this closed, or use the contents of the container to keep it closed. Reference images have been included in the photos.

For any questions, please reach out to me at kaizen3dprints@gmail.com