Gaggia PCB Slide Cover Compatible with the Gaggiuino PCB v3.0/3.1/4.0

Designed to be positioned between the funnel and the right steel wall in the Gaggia Classic Pro. The slit in the plastic is designed as a retention mechanism for the HV spade connectors.

You will require (12) 5x2mm magnets and an M3 x 25mm bolt

1. Use the M3 bolt to gently self-tap until it bottoms out
2. Press fit the magnets into the 6 holes
3. Unscrew the M3 bolt until the bolt shaft is visible
4. Route the LV & HV cables as shown in the photos
5. Slide the PCB all the way in, and gently screw the M3 bolt
6. Place the SSR and PCB/cover assembly as shown in the photos

To use the SCAD file, you will need OpenSCAD and the BOSL2 library.