SpeakerCoverHandDesign v2.stl

#3DPNSpeakerCover

This design is loosely based on Joel's "high five" logo.  There are two pieces to this design - a base unit approximately similar to Joel's template (provided in a Youtube video), and the cover, which plugs into the 1st part once the 1st part is installed.  This design will cover the screw mounts and hide the screws, and is removable (unless glued in place).

Best of luck to all my fellow designers - there are many great designs in this contest and it's wonderful to see our little hobby grow so quickly in such a short time.  Cheers!

If you decide to print this in Resin, please adjust the size by a factor of 1.02 to 1.04 depending on the type of resin you use.

HGPDesign v2.stl

#3DPNSpeakerCover

This is my 1st entry for the contest, using Joel's directions to create the base ring.  The unique idea of my design is to use a plug design to cover up the mounting screws and attach the cover to the base ring at the same time.  To ensure clearance with the M4/M5 screws, I have extended the height of the caps.  Please know that this design will most likely need to be printed using 

3D Printing since January of 2021, using an Anet ET5X and Fusion 360.  Learning new things every single day!

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

harropenk

Achievements

Seedling

Voyager

SpeakerCoverHandDesign v2.stl

HGPDesign v2.stl