Square Variant of my transforming Pen Case/Pen Stand that can hold erasers or small objects on the lid.


For printing this, print the case and the two gears separately and then assemble them.
Add box support enforcers in prusa slicer for the swivel hinges on both sides.
The shorter lids will also need supports.
Print the gears separately along the z axis and use a little super glue to attach them into place. 



Printer - Ender 3v2

Print settings
Layer height/resolution - 0.2mm
Infill - 15% for case, 100% for gears
Supports - refer to description above
Brim recommended for gears
Material - eSUN PLA+

#diy #DIY #augustchallenge

Folding Pen Holder MkVI

Left Hinge

Round Variant of my Pen Case/Pen Stand that can hold erasers or small objects on the lid.


For printing this, print the case and the two gears separately and then assemble them.
Add box support enforcers in prusa slicer for the swivel hinges on both sides.
The shorter lids will also need supports.
Print the gears separately along the z axis and use a little super glue to attach them into place. 



Printer - Ender 3v2

Print settings
Layer height/resolution - 0.2mm
Infill - 15% for case, 100% for gears
Supports - refer to description above
Brim recommended for gears
Material - eSUN PLA+

#diy #DIY #augustchallenge

Folding Pen Holder MkV

A Pen Case that doubles as a Pen Stand

Note: THIS MODEL HAS A FLAW THAT IT CANNOT FIT PENS LONGER THAN HALF THE BOX SIZE. PLEASE DOWNLOAD MKVI Model

Looking at the pen stand on my desk, I realized it doesn't have to be a static object that is only able to hold pens on a flat surface.
It can double up as a pencil case/pen case that can be carried around to office/school.
I came up with this double hinged swivel design with gears to make the lid close through 180 degrees.
#DIY #augustchallenge

I've added three variants of the pen stand. I'd recommend Mk5.5 as my favorite as it almost completely transforms into a pen stand.
The other two are variants that can hold erasers or small objects on the lid.

For printing this, refer to how I've split up the gears and the case in the stl files.
For printing the case, add box support enforcers in prusa slicer for the swivel hinges on both sides.
For Mk5.5 this is enough; for MkV and MkVI, the shorter lids will also need supports.
Print the gears separately along the z axis and use a little super glue to attach them into place. 



Printer - Ender 3v2

Print settings
Layer height/resolution - 0.2mm
Infill - 15% for case, 100% for gears
Supports - refer to description above
Brim recommended for gears
Material - eSUN PLA+

#diy #DIY #augustchallenge

Folding Pen Holder Mk5.5

Looking at the pen stand on my desk, I realized it doesn't have to be a static object that is only able to hold pens on a flat surface.
It can double up as a pencil case/pen case that can be carried around to office/school.
I came up with this double hinged swivel design with gears to make the lid close through 180 degrees.
#DIY #augustchallenge

I've added three variants of the pen stand. I'd recommend Mk5.5 as my favorite as it almost completely transforms into a pen stand.
The other two are variants that can hold erasers or small objects on the lid.

For printing this, refer to how I've split up the gears and the case in the stl files.
For printing the case, add box support enforcers in prusa slicer for the swivel hinges on both sides.
For Mk5.5 this is enough; for MkV and MkVI, the shorter lids will also need supports.
Print the gears separately along the z axis and use a little super glue to attach them into place. 



Printer - Ender 3v2

Print settings
Layer height/resolution - 0.2mm
Infill - 15% for case, 100% for gears
Supports - refer to description above
Brim recommended for gears
Material - eSUN PLA+

#diy #DIY #augustchallenge

Folding Pen Holder

Looking at the pen stand on my desk, I realized it doesn't have to be a static object that is only able to hold pens on a flat surface.
It can double up as a pencil case/pen case that can be carried around to office/school.
I came up with this double hinged swivel design with gears to make the lid close through 180 degrees.
#DIY #augustchallenge

For printing this, refer to how I've split up the gears and the case in the stl files.
For printing the case, add box support enforcers in prusa slicer for the swivel hinges on both sides.
this is enough
Print the gears separately along the z axis and use a little super glue to attach them into place. 



Printer - Ender 3v2

Print settings
Layer height/resolution - 0.2mm
Infill - 15% for case, 100% for gears
Supports - refer to description above
Brim recommended for gears
Material - eSUN PLA+

#diy #DIY #augustchallenge

Folding Pen Stand Mk5.5

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

harikrishnan527

Folding Pen Holder MkVI

Folding Pen Holder MkV

Folding Pen Holder Mk5.5

Folding Pen Stand Mk5.5