tracking pixel
Eckharts E

SFF Case Cube 2.0

by
eckhartselektronik
Follow
Follow
Remix Model
eckhartselektronik
eckhartselektronik
|
Image 1 of 10
SFF Case Cube 2.0 3d model
eckhartselektronik
eckhartselektronik
|
Image 1 of 10
SFF Case Cube 2.0 3d model
2D
3D
Makes
SFF Case Cube 2.0 3d model
SFF Case Cube 2.0 3d model
SFF Case Cube 2.0 3d model
SFF Case Cube 2.0 3d model
SFF Case Cube 2.0 3d model
SFF Case Cube 2.0 3d model
SFF Case Cube 2.0 3d model
SFF Case Cube 2.0 3d model
SFF Case Cube 2.0 3d model
SFF Case Cube 2.0 3d model
This model is restricted by licensing terms. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4890950.

This is a work in progress build of my redesign of the SFF Case Cube 1.0.

The original design was made by @Gunnthorian.

I hope this design fixes all downsides of the version 1.0.

This case supports:

  • 300mm GPU
  • SFX PSU
  • (M)ITX motherboard
  • Standard CPU tower coolers with fans up to 120mm. I used the measurements of the scythe mugen 5.
  • 2.5inch SSD and HDDs should definitely fit, 3,5inch could get tricky
  • 120mm fan in front (depending on your cpu-cooler setup, you may be able to put a 120mm fan in the back)
  • side IO Shield

Things you will need besides the printed parts:

Feel free to comment if you have suggestions. The files will most likely also be hosted on cults3d.


3 Likes8 DownloadsNovember 29, 2022


3 Likes8 DownloadsNovember 29, 2022
This model is restricted by licensing terms.