This tile is an evolution of Triple Lane Tile - now with even more lanes!

The three upper paths shouldn't cause any issues. The two lower paths have very tight curves and challenging entry/exit angles. Balls will require a LOT of speed in order to carry momentum all the way through. Consider pairing with some Gauss Cannons or Launchers.

Hardware: Two M3x8 button head cap screws Four 6x2mm magnets

Assembly: Connect the two halves using the link and the button head screws. Don't overtighten. Glue in the magnets, alternating polarities. Allow the glue to fully cure before closing the tile.

Special thanks to NoStepOnDeez for the inspiration and design feedback - and also to the Voidstar Labs Discord for all of the helpful suggestions!