tracking pixel
cyanidesugar

Yennefer in Purple - Hueforge Print

by
cyanidesugar
Follow
Follow
Remix Model
cyanidesugar
cyanidesugar
|
Image 1 of 3
Yennefer in Purple - Hueforge Print 3d model
cyanidesugar
cyanidesugar
|
Image 1 of 3
Yennefer in Purple - Hueforge Print 3d model
2D
3D
Makes
Yennefer in Purple - Hueforge Print 3d model
Yennefer in Purple - Hueforge Print 3d model
Yennefer in Purple - Hueforge Print 3d model
This model is restricted by licensing terms. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6210935.

Yennefer of Vengerberg - from the Netflix Witcher Season 3

Note: The roll of Fuschia colour that I have prints purple when it's a thin layer over black, hence why the print looks purple. If you have an actual purple filament, it will be safer.

The included stl file is for a 97x97mm print, however I printed it at 200mm x 200 mm. You can adjust this in your slicer but BE CAREFUL to NOT have 'Uniform Scale' ticked otherwise it will also scale your z height and you don't want that!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: - PLA Siddament Black Transmission Distance: 0.2 - PLA+ Sunlu Fuschia Transmission Distance: 6.8 - PLA Sunlu Beige Transmission Distance: 8.2 - PLA Sunlu Lilac Transmission Distance: 6.6 - PLA Sunlu Beige Transmission Distance: 8.2

Swap Instructions: - Start with Black - At layer #16 (1.36mm) swap to Fuschia - At layer #20 (1.68mm) swap to Beige - At layer #28 (2.32mm) swap to Lilac - At layer #29 (2.4mm) swap to Beige for the rest.

Your filament settings and mine may differ in TD, so best to adjust yours according to your known TD filaments.


10 Likes10 DownloadsSeptember 10, 2023



10 Likes10 DownloadsSeptember 10, 2023
This model is restricted by licensing terms.