Combining some classic art and classic gaming! If you resize this print, please ONLY resize the X and Y dimensions!

Instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

The Model is 300x450mm in size You may print at higher layer heights below the Base Thickness of 0.6mm The Max allowed Thickness is 2.2mm and the Actual Thickness is 2.12mm

Filaments Used:

• #000000 PLA Kingroon Black Transmission Distance: 0.2
• #00358e PLA BambuLab Basic Blue Transmission Distance: 3
• #689397 PLA BambuLab Blue Gray Transmission Distance: 3.1
• #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5.8
• #4d3324 PLA BambuLab Matte Dark Chocolate Transmission Distance: 0.2
• #ff5500 PLA CC3D Orange Transmission Distance: 6.5
• #f0be02 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
• #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5

This print uses 8 unique filaments

Swap Instructions:

• Start with Black
• At 0.68mm swap to Blue
• At 0.92mm swap to Blue Gray
• At 1.08mm swap to Jade White
• At 1.32mm swap to Black
• At 1.4mm swap to Dark Chocolate
• At 1.48mm swap to Orange
• At 1.88mm swap to Savannah Yellow
• At 2.04mm swap to Ivory White for the rest.