This is a glue holder for the .21ml Elmers glue sticks. Mine are the scented ones you can buy off of Amazon. It holds 4 sticks in a 1x 2 container that’s 1 unit high. There are some parametric variables that can be edited to make minor adjustments if needed: • Glue hole size: if you need larger or smaller holes. • Distance from top: The distance of the holes from the top or bottom edges. • Distance from sides: The distance of the first hole from the sides. • Distance from holes: This is the distance of the 2nd hole on each row from the 1st hole. ◦ The combination of Distance from sides, distance from top and distance from holes allows you to line up the holes to be equally spaced.
I’m new to Fusion 360 and this is my first submission so let me know if there’s anything else I should be doing or if there are any other recommendations for me. Also, feel free to just generally let me know what you think.