See the video of the modeling at the link below:
See the video of the assembly at the link below:
UPDATE 01 (07-27-2021) ****** I made an improvement to the model, now it is no longer necessary to have the smooth pin and spindle lock piece that appears in the assembly demonstration video, as it is now part of the Fixed part being a single piece, thus facilitating the assembly of the set!!! ******
UPDATE 02 (08-10-2021) ****** Upon community requests I uploaded 2 new files "Fixed Part Thread Clearance 0.4mm" and "Movel Part Thread Clearance 0.4mm" where I increased the thread clearance of 0.2mm to 0.4mm in order to facilitate assembly for those who are encountering assembly difficulties ******
Due to the need to fix my parts for finishing, I decided to design this bench vise (known by some as the morça). With it you'll also be able to finish your parts with greater precision and easier, just fix it to a bench and then fix the part you want to finish or carry out any rework.
In this project, 100% of the pieces are printed in 3D, so you don't need anything else, just print, assemble and enjoy.
Quantities required for printing:
- 02 units for parts with final description 2725 / 6121 / 1617
- 01 unit for the other parts.
And then you want to print yours too to finish your pieces??? So download the model and then tell me what you think in the comments!!! 😊
#3D #3DPrinted #3DProject #All3DPrinted #3DModeled #fusion360 #benchvise #tornodebancada #rework 3acabamento #acabamentoempecas #finishing #Project #Mechanical #Gear #Shaft #Moviment #Howitworks #Concretize