tracking pixel
Bristien H

#Gridfinity Toy Brick Adapter

by
bigbrisco
Follow
Follow
Remix Model
bigbrisco
bigbrisco
|
Image 3 of 3
#Gridfinity Toy Brick Adapter 3d model
bigbrisco
bigbrisco
|
Image 3 of 3
#Gridfinity Toy Brick Adapter 3d model
2D
3D
Makes
#Gridfinity Toy Brick Adapter 3d model
#Gridfinity Toy Brick Adapter 3d model
#Gridfinity Toy Brick Adapter 3d model

This item is for use with the #GridFinity system by Zach Freedman:

https://www.youtube.com/watch?v=ra_9zU-mnl8

A 1 wide by 1 deep by 1/2 unit high "Generic Building Brick" adapter plate for Gridfinity. Proudly display all your special brand-agnostic little guys in the midst of all your gubbins and paraphernalia.

This was printed with an 0.4 nozzle, I'm not sure it is advisable to print with larger ones due to the extreme precision required for brick-and-stud blocks to correctly seat. Printing studs like these is a difficult task, and no 3d printers will have the same extrusion widths. Included are .STL files with the studs set to the proper 4.8mm size and also the 5.05(!) I had to export for my under extruding machine to make something snap-able. Also included is the Fusion 360 archive, edit the sketch Studs and change the top left stud diameter and the rest will follow as they are an array. A 1x2 test plate archive is also included so you can dial in the stud size without wasting filament.

Results may vary, Blacktron Pilot not included.


48 Likes165 DownloadsApril 15, 2022


48 Likes165 DownloadsApril 15, 2022