A simple dish treat toy for Bunnies. The sides are rounded to avoid the bunny grabbing it and tipping it over.
The holes are not very deep but I find it's the perfect size for a regular dried banana slice or pellet. (Yes, pellets are TREATS, not food. Your bunny's diet should be 90% hay and a handful of veggies a day, pellets and banana/carrot should be given sparingly every other day)
I've added a new file, Cap v2, it's concave (see section picture) to accomodate bigger treats; if you want to print this, you will have to use supports and I reccommend to print it with 100% infill.
Pay attention to the cap infill, you either have to use 30% or more or use a support blocker to make the stem solid. If it's not solid enough and your bunny bites it off he might risk suffocation, I am not responsible for any injuries your pet may occur whilst using this design.
Print 8 caps.
Notes: I've printed the dish with 15% infill but i guess 10% would suffice. The cap however was printed with 30% infill to make the stem more solid, you could also use a support blocker to make only the stem solid.
Cap v2 has to be printed with supports best with also 100% infill
For a nicer result, use a concentric pattern; dish only first layer, cap first layer + top/bottom.
Go to the thingiverse page to download the updated v2 hollow cap, thangs doesn't allow 3mf files... https://www.thingiverse.com/thing:4918388