A simple dish treat toy for Bunnies.
The sides are rounded to avoid the bunny grabbing it and tipping it over.

The holes are not very deep but I find it's the perfect size for a regular dried banana slice or pellet. (Yes, pellets are TREATS, not food. Your bunny's diet should be 90% hay and a handful of veggies a day, pellets and banana/carrot should be given sparingly every other day)

I've added a new file, Cap v2, it's concave (see section picture) to accomodate bigger treats; if you want to print this, you will have to use supports and I reccommend to print it with 100% infill.

Pay attention to the cap infill, you either have to use 30% or more or use a support blocker to make the stem solid. If it's not solid enough and your bunny bites it off he might risk suffocation, I am not responsible for any injuries your pet may occur whilst using this design.

Print 8 caps.

Notes:
I've printed the dish with 15% infill but i guess 10% would suffice. The cap however was printed with 30% infill to make the stem more solid, you could also use a support blocker to make only the stem solid.

Cap v2 has to be printed with supports best with also 100% infill

For a nicer result, use a concentric pattern; dish only first layer, cap first layer + top/bottom.

Go to the thingiverse page to download the updated v2 hollow cap, thangs doesn't allow 3mf files...
https://www.thingiverse.com/thing:4918388

Rabbit toy - Treat dish

Cap.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4890430.

Remix of Skaaj4's case

Adapted to fit the new v3.1A DIY board from hobbycomponents.
The new board has a different layout and size to allow a hybrid configuration (2 LEDs can be soldered)


I did not test the button as i don't use it. 

EDTracker DIY v3.1A Case

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4964469.

This is to replace the latch on the dust cover for the BMW e83 headlights, clean off the old latch pieces and just slide this in.

Dust cover part number 1305239123

It holds nicely even if not glued. DO NOT glue, if you do it will be impossible to remove without cutting the latch

I will not ask for money like others do. Have it, it's free.


I will not be responsible if your car/house/hair/eyes/baby catches fire or are stolen, you print and use this at your own peril.

Headlight dust cover latch fix for BMW X3 e83

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4651301.

I made this to fit in the hole of the top cover of my Eheim AquaPro 126 aquarium.

The cover has a spot to put the Eheim AutoFeeder but it seems that one must buy also the Eheim feeding station to avoid the food ending up all aound the hole.
Tired of cleaning i made this so that when the autofeeder does its job, nothing is spilled and there will be no food ending up on the plastic around the hole.

This is just my first iteration, if you use food in big flakes then it might be a bit too short but no worries, simply align the Autofeeder to the side closest to you and the problem is solved.

I also evaluated to stretch the bottom and let it reach the water just like the feeding station but I don't know enough about PLA staying in the aquarium water.

AutoFeeder food funnel for Eheim AquaPro 126 cover

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

alokin

Rabbit toy - Treat dish

EDTracker DIY v3.1A Case

Headlight dust cover latch fix for BMW X3 e83

AutoFeeder food funnel for Eheim AquaPro 126 cover