I was having issues with the plastic Creality spools sitting in the dryer like they should, so I designed this holder. It currently only works in 1/2 the dryer and for 1kg spools and smaller.
You will need to print the "A" and "B" sides, (2) spool holders, the threaded axle, and (2) m10 bolts. The axle should be have enough clearance for the bolts to thread in nicely.
In the pictures I'm still using a piece of 1/4-20 allthread rod to hold the factory axle in place. Note: My PLA model did become easier to assemble and disassemble after being in the dryer for a bit.
Comments welcome, Happy Printing!

Eibos Filament Holder

The plastic Creality spools were not working well in the Eibos dryer so I designed a holder for 1/2 the dryer (Not currently designed to work in both bays). Included are both 55 and 56mm spool holders (55mm for polymaker 1kg spools, and 56mm for creality 1kg spools)
You will need Both "A" and "B" parts, (2) Bolts, and the Threaded axle. The axle should have adequate relief for the bolts to thread in nicely.
In the picture I'm still using one of the axles that came with the dryer with a 1/4-20 piece of allthread. 
The bearings are a snug fit and I had to assemble mine with a clamp.
Comments welcome, Happy printing! 

Eibos Filament Holder

Tags: