Tamiya Dyna Blaster part D2

Replacement part D2 (also D1, when mirrored) for Tamiya Dyna Blaster RC car.

Instead of captive nuts inside the part as with the original, use washers and external nuts for mounting. You'll also need slightly longer screws than the original ones for this.

You'll need to drill out the mounting holes to 3mm to fit the screws. The hole for the wheel arm needs to be drilled to 4.5mm to fit the original oil copper bushings.

Designed for and tested on an original Dyna Blaster. My understanding is that the original Dyna Storm and the later re-make of the Dyna Storm also use the same part.