This adapter is made for a camera/accessories hot shoe mount to enable 90 degree mounting options.

Hot Shoe Adapter 90 Degrees

I designed this rim for my Tamiya RC car based on a design from Rotiform.

Tamiya Rim

I designed this case to recycle my old LiPos and make them fit in my Tamiya truck.
One version is without clips so the top needs to be glued in place. The other one has clips to hold the lid in place but needs a well tuned and precise printer.

The case is 122mm deep and the opening is 20mm x 42mm with a 10mm radius for the corners. The battery should be a little shorter than 122mm since the cables need to be places inside the case as well.

https://www.youtube.com/watch?v=S8NUQv69abw&feature=youtu.be

Tamiya LiPo Case

This case works with the corresponding click-in lid. The hole in the bottom helps the battery removal.

This mount is designed to work with Reelsteady GO, a video stabilisation software for GoPro. The mount filters high frequency vibrations, since the software can not handle them.
The results without the use of the software are worse than with a standard mount.

Demo video where I used this mount: https://www.youtube.com/watch?v=uDVDVTEyM6o

GoPro Session Reelsteady FPV Mount

his case is designed to fit the Raspberry Pi Zero W.

The wall thickness was designed to work with a 0.2mm layer height using the PrusaSlicer.
First layer height is set to 150%.
Print with 4 perimeters.

Raspberry Pi Zero Case for Aluminum Extrusions

The Pi Zero Case for 2020 Aluminum Extrusions.

Pi Zero Case 2020

This is a fan fixture for the E3D V6 Heat Sink to accommodate a 3030 axial fan together with a 4040 radial blower fan.

E3D V6 3030 + 4040 Blower Fan Mount

I designed a few Grips for the Apple Pencil 2. They might work on the Apple Pencil 1 but I do not have one to test.
There are three sizes (Normal, Ergo, Big) and one Normal version with a cut out for the touch sensitive button on the Apple Pencil.
I like the Ergo version the most since it is the smallest (thin area for the finger) and the index finger and thumb can be placed nicely.

All versions can be printed in TPU without support material.
The bottom of the mount is closed in the .stl file to ensure better bed adhesion. The bottom is one layer thick (0.2mm) and can be cut away.

Apple Pencil Grips

The version that supports the tapping feature of the Apple Pencil.

Apple Pencil Grip Touch

This is a mount/holder for the Amazon Fire TV remote with volume buttons.
The mount can be printed without supports and is designed to fit the remote perfectly. Depending on the precision of the printer the scaling of the part needs to be adjusted.

Fire TV Remote Wall Mount

Fire TV Remote Wall Mount Short

Fire_TV_Remote_Mount_LOW.stl

Huenersdorff Canister Cap with tube fittings on the outside and inside for attaching silicone tubes for pumps, etc.
9mm or 19mm

Huenersdorff Canister Cap with 9mm Tube Fitting

CanisterCap9mm.stl

Huenersdorff Canister Cap with 19mm Tube Fitting

Huenersdorff Canister Cap with Tube Fitting

Electrical Engineer interested in CNC, 3D Design, 3D Printing, FPV and a lot more!
I moved some of my designs over from Thingiverse, because ... you know!

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Quadropus

Achievements

Seedling

Debutant