This silly (and slightly unsanitary) tile lets you reset traps, flip flippers, and maybe even blow tiles off the board entirely! It all depends on how hard you can huff and puff. Just don't put this tile in your pool during flu season.

If you like the flipper-flipping concept but are too fastidious for this one, check out my Screwdriver Tile.

Rules: Trigger: Blow on the board for up to 2 seconds.

Rules Clarifications:

• You may make multiple discrete breaths as long as the time between the start of your first breath and the end of your last breath is less than 2 seconds.
• An opponent may set a timer to enforce the two-second time limit.
• Any balls you get rolling again from this ability count as you having rolled them yourself.

Required Materials:

• Glue

Printing: I recommend printing the Handles, Bellows, and Nozzle at smaller layer height. (I used 0.1mm)

Assembly:

1. Glue the Handles to the Bellows. The pegs on the Handles should line up with the holes on the Bellows.
2. Glue the Bellows into the Base.
3. Glue the Nozzle into the Bellows.