Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5860070.
Update 28 Feb 2023: Saw a better deal and updated the affiliate link.
Finally found a low cost USB powered LED clock that will sync time off the internet via Wi-Fi! But didn't have a case/holder.
So I designed a simple snap on holder to tilt it 15 degrees and make it more stable.
Please read through description below about the Wi-Fi clock before proceeding to print.
Firmware on the clock is for time zone GMT+8 hours, if you like a different time zone, you will need to flash a different firmware. I have not tried that as the current time zone is perfect for me.
I find the original firmware has a security flaw as anyone can assess it through the Wi-Fi SSID and know your home Wi-Fi password. My workaround is to put some conductive tape over the Wi-Fi antenna to weaken the Wi-Fi signal. In its original state, the signal strength is already quite weak but will likely still penetrate through one wall.
Firmware available on Github. (Proceed at own risk) https://github.com/maarten-pennings/303WIFILC01
Sorry I lied, price is lower than 8USD. =)
I bought from this seller below https://a.aliexpress.com/_mLMmSTk
Alternatively can buy from https://a.aliexpress.com/_mrUi3EI
Want to buy me a coffee? https://www.buymeacoffee.com/zer0s
Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you)
AliExpress Affiliate link: WiFi clock module 0.8 inch https://s.click.aliexpress.com/e/_DEBN78t
Consolidated affiliate links of other 3D printing-related items: https://wp.me/peMLu6-j
For Amazon affiliate links https://wp.me/peMLu6-2C