tracking pixel
Zack F

Hextraction Tile Built for Two

by
ZackFreedman
Follow
Follow
Remix Model
ZackFreedman
ZackFreedman
Image 1 of 2
Hextraction Tile Built for Two 3d model
2D
3D
Makes
Hextraction Tile Built for Two 3d model
Hextraction Tile Built for Two 3d model
This model is restricted by licensing terms. 
119 Likes1.1K DownloadsMay 13, 2023
This model is restricted by licensing terms. 


Stretch your turn to the limit with this eye-popping mechanical tile that unfolds to hustle your ball to the end zone. Make foes flip their lids with this wacky tile for Hextraction, the hackable, 3D-printable board game.

The Tile Built for Two is probably the wildest tile I've ever made - it unfolds like a locket to occupy two slots. Or not - the tile still works when it's folded, so you can drop the whole shebang if you're not interested in living large.

Just remember the rules; you have to play the tile and THEN unfold it, so if the adjacent spot is occupied, you can't whip it out. You can only manipulate mechanisms as you play the tile, and immediately afterward, so if that slot opens up, you're stuck. Still, if you have a way to return this to your hand, maybe you can do some surprise plays?

To keep the profile slim, this tile has lower walls than average. Be careful entering at an angle - you might go right over the top.

Print one top, one bottom, and two links. Use M2x8 screws to connect it up. It'll be a very loose fit - this is important to make it fit all kinds of boards. I recommend gluing a few 6x2mm magnets in the holes to hold it shut.

Fusion 360 source: https://a360.co/3psg0Ab

All of my Hextraction tiles have a built-in sacrificial support under each notch - remember to snap it off after printing. Enable the brim if these detach from the bed.

Hextraction is a 3D-printable, modder-friendly board game designed by me, Zack Freedman of Voidstar Lab. In addition to tiles, you'll also need 10mm steel balls or 3/8" slingshot ammo and a game board. To learn the rules and how to get started, watch the Hextraction video!

Hextraction is absolutely free - it's free of charge - all of my models are here on Thangs, commercial use allowed. It's free-form - you can play with any number of opponents, even zero. It's free to modify - you can create your own tiles and configure your own board.

For more information, visit https://playhextraction.com.


119 Likes1.1K DownloadsMay 13, 2023





This model is restricted by licensing terms. 
119 Likes1.1K DownloadsMay 13, 2023
This model is restricted by licensing terms.