Make your foes' heads spin with this revolutionary tile for Hextraction, the hackable, 3D-printable board game.

The Gear Tile's triggered effect lets you lift up an adjacent tile and turn it one notch in either direction. Remember, a notch isn't 60 degrees, it's as far as necessary to make it sit flat. Just be careful if it's got balls on it; if they fall off the tile, you're the one who rolled them! Pull off ten-dimensional gigabrain plays like toggling paths, reversing mechanisms, resetting Trap Tiles, flipping Launchers, and more.

The tile itself can also create some neat strategies - that big peg in the middle can make it behave like a Pachinko, Peace, or DIC Tile.

Don't forget to print that rules card... and some on-theme steampunk copper filament.

Fusion 360 source: https://a360.co/3I9UIxI

All of my Hextraction tiles have a built-in sacrificial support under each notch - remember to snap it off after printing. Enable the brim if these detach from the bed.

Hextraction is a 3D-printable, modder-friendly board game designed by me, Zack Freedman of Voidstar Lab. In addition to tiles, you'll also need 10mm steel balls or 3/8" slingshot ammo and a game board. To learn the rules and how to get started, watch the Hextraction video!

Hextraction is absolutely free - it's free of charge - all of my models are here on Thangs, commercial use allowed. It's free-form - you can play with any number of opponents, even zero. It's free to modify - you can create your own tiles and configure your own board.

For more information, visit https://playhextraction.com.