Upload for Search
Search By Text
Upload for Search
Search By Text
Zack F

Filament Hanger Rack

by

ZackFreedman

Follow
Follow
Like
Filament Hanger Rack by ZackFreedman full viewable 3d model
Loading preview...
12 Likes50 DownloadsAugust 24, 2021


Community Uploads

No photos added yet, be the first to upload a photo!


12 Likes50 DownloadsAugust 24, 2021

Community Uploads

No photos added yet, be the first to upload a photo!

Let me guess. You have a closet full of 3D printers. It's got a clothes hanger bar, but you don't have clothes, because who needs to go outside when you have a closet 3D printers? Put that storage space to use with this hanger! See it in action in this video: [put video here] You'll need at least two hangers, ideally one each foot or so. For each, print: - 1x Hanger Hook - 1x Hanger Hub - 2x Long Bar - 1x Short Bar - 1x Hanger Corner - 1x Hanger Corner (mirrored) You'll also want a pile of Wheels, ideally in multiples of four. You'll also need: - 8mm metal rod, long as you want, cheapest you can find - 4x 12mm M3 screws and M3 nuts per hanger - A pile of 608 bearings, ideally in multiples of 4 Instructions! - Glue everything but the hook and wheels together - Mount the Hook on one side with an M3 screw and nut - Insert an M3 screw into one or two pockets on each side, add the screws, don't tighten too far - Shove bearings into wheels - Thread wheels and hangers onto rods as desired - Tighten screws - Hook over bar, add screw to secure hook - Put filament on wheels - Print
CategoryDevices




12 Likes50 DownloadsAugust 24, 2021


Community Uploads

No photos added yet, be the first to upload a photo!


12 Likes50 DownloadsAugust 24, 2021

Community Uploads

No photos added yet, be the first to upload a photo!