Profile Image
Vixen Printz.
Vixen Printz.

Vixen Printz.

Select a membership plan

Monthly billing
Annual billing
30% off
The Den
The Den
$10.50
/ month
when billed annually

Basic foundations for hobbyists and creators.

Deep archive access without needing immediate access to the newest releases.

This Tier includes:

  • Limited Monthly Downloads: 5 monthly downloads

  • The Baseline Archive: Instant access to established basic/legacy designs.

  • The Final Cascade: This tier serves as the retirement home for designs. All models overtime will eventually graduate and settle into this tier.

TERMS OF SERVICE:

  • File Protection: Digital files may not be sold, listed for free, posted elsewhere, or distributed in any manner.

  • Cancellation Policy: Upon subscription cancellation, you must immediately remove any commercial shop listings utilizing designs or models by Vixen Printz.

  • Intellectual Property: All digital products offered on Thangs are protected by intellectual property rights and remain the sole property of Vixen Printz.

  • Enforcement: Any shops or individuals found in breach of these terms will be held legally accountable.

Immediate access. Cancel anytime.

Model is included in this plan
Available now

25% off
The Alpha Vault
The Alpha Vault
$30.00
/ month
when billed annually

Sly by design. First to the hunt.

Built for power-users, early adopters, and commercial sellers who want the highest-engineered projects the exact moment they are finalized.

This Tier includes:

  • Unlimited Monthly Downloads: Uncapped access to the entire Vixen Printz ecosystem

  • Elite Commercial License: Authorization to sell physical 3D prints of newest flagship designs immediately upon release.

  • Instant Vault Access: Immediate access to new release project builds before anyone else.

  • The Exclusivity Window: Models released here remain strictly locked in the Vault. They stay exclusive until the next major project release arrives (typically 8 ~ 12 months), at which point they cascade down to the lower tiers.

  • Fuel the Next Build: Your subscription directly finances the long-term research & development required to bring future projects to life.

TERMS OF SERVICE:

  • File Protection: Digital files may not be sold, listed for free, posted elsewhere, or distributed in any manner.

  • Cancellation Policy: Upon subscription cancellation, you must immediately remove any commercial shop listings utilizing designs or models by Vixen Printz.

  • Intellectual Property: All digital products offered on Thangs are protected by intellectual property rights and remain the sole property of Vixen Printz.

  • Enforcement: Any shops or individuals found in breach of these terms will be held legally accountable.

Immediate access. Cancel anytime.
30% off
The Clever Kit
The Clever Kit
$17.50
/ month
when billed annually

A premium archive that grows as top-tier projects age

Positioned for active builders, The Clever Kit balances deep archive access with a steady influx of high-end models.

This Tier includes:

  • Unlimited Monthly Downloads

  • Commercial license: Authorization to sell physical 3D prints of these models.

  • The Premium Archive: Includes everything in The Den, plus established, mid-lifecycle flagship designs.

  • The Project Cascade: Top-Tier designs cascade directly into this tier upon the arrival of a new major project release (typically 8 ~ 12 months)

TERMS OF SERVICE:

  • File Protection: Digital files may not be sold, listed for free, posted elsewhere, or distributed in any manner.

  • Cancellation Policy: Upon subscription cancellation, you must immediately remove any commercial shop listings utilizing designs or models by Vixen Printz.

  • Intellectual Property: All digital products offered on Thangs are protected by intellectual property rights and remain the sole property of Vixen Printz.

  • Enforcement: Any shops or individuals found in breach of these terms will be held legally accountable.

Immediate access. Cancel anytime.
DigitalDigital Store
Bundle
PrintsPrint Store
My Thangs
Access 15,000+ models$14.99/month
DigitalDigital Store
Bundle
PrintsPrint Store
My Thangs
Access 15,000+ models$14.99/month
Vixen Printz
Vixen Printz.420 followers
Follow
Vixen Printz.
Vixen Printz.
|
Image 1 of 7
Project Oreo: 3.5" FPV Drone 3d model
Vixen Printz.
Vixen Printz.
|
Image 1 of 7
Project Oreo: 3.5" FPV Drone 3d model
Project Oreo: 3.5" FPV Drone video thumbnail
Project Oreo: 3.5" FPV Drone 3d model
Project Oreo: 3.5" FPV Drone 3d model
Project Oreo: 3.5" FPV Drone 3d model
Project Oreo: 3.5" FPV Drone 3d model
Project Oreo: 3.5" FPV Drone 3d model
Project Oreo: 3.5" FPV Drone 3d model
Project Oreo: 3.5" FPV Drone 3d model

Project Oreo: 3.5" FPV Drone

8 downloads · 1 month ago · **Note:** - Frame optimized for **NewBeeDrone Hummingbird 255 AIO** (25.5 × 25.5 mm) and 9 × 9 mm m
Description

Note:

  • Frame optimized for NewBeeDrone Hummingbird 255 AIO (25.5 × 25.5 mm) and 9 × 9 mm motor mounting

  • Betaflight PIDs & Filters pages (snapshot) shared with model files.

  • Ventilation: The side panels have intentional vent cut‑outs for the VTX and AIO. Bench tests at full VTX power showed no overheating or shutdown, and in-flight temps will improve further due to natural airflow.

  • Pro Tip: An option most will miss is flying without side panels for maximum ventilation.

This model features the following parts:

  1. Unibody Frame (PET-CF Recommended)
  2. Side Panel (PETG Recommended)
  3. Motor Wire Cover (PETG Recommended)
  4. Landing Skid (TPU Recommended)
  5. FPV Camera Mount (TPU Recommended)
  6. GPS Mount (TPU Recommended)
  7. RX Mount - Mirrored (TPU Recommended)
  8. RX T-Antenna Mount (TPU Recommended)
  9. XT30 Mount (TPU Recommended)
  10. Dual VTX Antenna Mount (TPU Recommended)
  11. Mounting Feet (TPU Recommended)
  12. Soldering Jig (PLA Recommended)

Other non-3D printed components include:

  • AIO (All-In-One) Board - Hummingbird 255 AIO Flight Controller (Optimal for Build)
  • Receiver - Foxeer ELRS 2.4G RX LNA w/ T-Antenna
  • Battery - GNB 4S - 850 mAh Lipo Battery XT30
  • Battery Strap (Accomodates 15mm wide strap)
  • Motor - 4 x XING2 1404 3800KV (Accomodates 9mm x 9mm motor mounting)
  • Propellor - 4 x 3520 - Triblade Gemfan Propellor
  • FPV Camera - Dji O4 air unit pro
  • GPS - GEP-M10 Nano
  • 16 x M2-5mm screws (4 per Motor)
  • 12 x M2-4mm screws (for mounts, panels, and mounting feet)
  • 12 x M2-7mm screws (for propellors and DJI O4 Module Cover)

Disclaimer: This product is designed for hobby and/or commercial use only. Users are responsible for ensuring compliance with all applicable local laws, regulations, and guidelines before using this product. Any misuse, improper handling, or use of this product in violation of local regulations is solely the responsibility of the user. The manufacturer and seller disclaim any liability for damages, injuries, or legal consequences resulting from improper use or non-compliance. By purchasing and using this product, you acknowledge and agree to these terms.

Tags:

Discussions

Project Oreo: 3.5" FPV Drone

8 downloads · 1 month ago in 
RC
 and 
Robotics
Vixen Printz
Vixen Printz.420 followers
Follow

More models

Vixen Printz
Vixen Printz.
4-Inch Dead Pushy Cat Drone (Dead Cat Design + Pusher Config) 3d model

4-Inch Dead Pushy Cat Drone (Dead Cat Design + Pusher Config)

Vixen Printz
Vixen Printz.
5-Inch FPV Drone 3d model

5-Inch FPV Drone

Vixen Printz
Vixen Printz.
DJI O4 Camera & VTX Mount (includes redesigned Upper Saddle) 3d model

DJI O4 Camera & VTX Mount (includes redesigned Upper Saddle)

Vixen Printz
Vixen Printz.
HandyStand 3d model

HandyStand

Vixen Printz
Vixen Printz.
3-Inch FPV Drone (Analog, 20x20 Stack) 3d model

3-Inch FPV Drone (Analog, 20x20 Stack)

Vixen Printz
Vixen Printz.
3.5-Inch Drone Frame 3d model

3.5-Inch Drone Frame

Vixen Printz
Vixen Printz.
4-Inch Drone Build (20 x 20 Stack) 3d model

4-Inch Drone Build (20 x 20 Stack)

Vixen Printz
Vixen Printz.
2S-18650 LiON battery Pack (Pogo Pin Modules) 3d model

2S-18650 LiON battery Pack (Pogo Pin Modules)

fpvgeek24
fpvgeek24
18650 Micro Foldable FPV Drone 3d model

18650 Micro Foldable FPV Drone

GhostPainBrain
GhostPainBrain
Desktop FPV Dual Drone Display Base 3d model

Desktop FPV Dual Drone Display Base

The Duck Vault
The Duck Vault
Propeller Guards for Mk4 7 inch Drone 3d model

Propeller Guards for Mk4 7 inch Drone

tweetfpv
tweetfpv
DIY Hex Nano leaf like LED panels 3d model

DIY Hex Nano leaf like LED panels

BrentsWorkbench
BrentsWorkbench
Football Bottle Opener 3d model

Football Bottle Opener

trackdesign
trackdesign
OREO COOKIE AIRTAG HOLDER: KEYCHAIN AND REGULAR VERSION FOR YOUR TRACKER 3d model

OREO COOKIE AIRTAG HOLDER: KEYCHAIN AND REGULAR VERSION FOR YOUR TRACKER

Mike96
Mike96
Convertible transporter drone frame v1.0 - Full assembly v1.0 - 3d model

Convertible transporter drone frame v1.0

LCruz3D
LCruz3D
WHOOP Drone Gates - Modular System 3d model

WHOOP Drone Gates - Modular System

The Duck Vault
The Duck Vault
RadioMaster Pocket 7" Monitor Mount 3d model

RadioMaster Pocket 7" Monitor Mount

J
Jogiarea
Einfache Makita Akku Wandhalterung / Simple Makita battery wall mount 3d model

Einfache Makita Akku Wandhalterung / Simple Makita battery wall mount

electrosync
electrosync
3D Printed RC Catamaran Utility Boat 3d model

3D Printed RC Catamaran Utility Boat

Eskimo Pie
Eskimo Pie
Hackintosh+ Raspberry Pi 3/4/5 3d model

Hackintosh+ Raspberry Pi 3/4/5