.png&w=256&q=75)
5-Inch FPV Drone
102Ā downloadsĀ Ā·Ā 1 year agoĀ Ā·Ā **This model features the following parts:**
1. Bottom Frame _(PET-CF Recommended)_
- 20x20 sta
This model features the following parts:
- Bottom Frame (PET-CF Recommended)
- 20x20 stack mounting hole available
- 30x30 stack mounting hole available (you will need to use different stack components from the ones listed below)
- Upper Saddle (PET-CF Recommended)
- DJI O3 Camera Mount (TPU Recommended)
- DJI O3 VTX Mount (TPU Recommended)
- Foxeer ELRS LNA RX Mount (TPU Recommended)
- 20x20 & 30x30 stack mounting hole available
- Motor Skid (TPU Recommended)
- Motor Skid - Mirrored (TPU Recommended)
- Action Camera Spacer (TPU Recommended)
- Place behind Action Camera when no filter is used
Other non-3D printed components include:
- Flight Controller - Mamba 4th Gen MK4 F722 Mini
- Electronic Speed Controller - FOXEER REAPER SLIM 60A ESC
- Receiver - Foxeer ELRS 2.4G Receiver LNA V3.2.1 with T-Antenna
- Battery - Tattu R-Line 6S - 1200 mAh Lipo Battery XT60
- Motor - 4 x T Motor F60 PRO IV 2.0 1950 kv
- Propellor - 4 x HQ Prop Ethix S5
- FPV Camera - Dji O3 with FlyFishRC 40mm Stubby Antenna
- GPS - MATEKSYS SAM-M8Q
- Action Camera - Dji Action 2 with ND Filter
- M3 Screws (see video)
- M2 Screws & Hex Nut (see video)
- M2 Nylon Lock Nut (see video)
- M6 Nylon Lock Nut (see video)
- Standoff - 25mm M3 Smooth Hex
- Racewire - 4 x RGB RACELITEWIRE
Disclaimer: This product is designed for hobby and/or commercial use only. Users are responsible for ensuring compliance with all applicable local laws, regulations, and guidelines before using this product. Any misuse, improper handling, or use of this product in violation of local regulations is solely the responsibility of the user. The manufacturer and seller disclaim any liability for damages, injuries, or legal consequences resulting from improper use or non-compliance. By purchasing and using this product, you acknowledge and agree to these terms.
5-Inch FPV Drone
4-Inch Dead Pushy Cat Drone (Dead Cat Design + Pusher Config)
DJI O4 Camera & VTX Mount (includes redesigned Upper Saddle)
HandyStand
2S-18650 LiON battery Pack (Pogo Pin Modules)
4-Inch Drone Build (20 x 20 Stack)
3-Inch FPV Drone (Analog, 20x20 Stack)
3.5-Inch Drone Frame
Adult jumping spider terrarium 5 inch x 7 inch glass
Propeller Guards for Mk4 7 inch Drone
18650 Micro Foldable FPV Drone
5 inch funnel
FPV Drone Wall Mounts
%2520-%2520Copy.png&w=3840&q=75)
FPV drone wall motor hanger
Elecrow RC050 5-inch HDMI Touch Screen Case for 3D Printers (OctoDash)
5 inch Horn for M56 Helmets.stl
motor bell gripper for FPV drones
Elecrow 5 inch LCD frame
Elecrow 5 inch Display Case
gridfinity 1x3 .5 inch mill bit container holder
Awesome print and flies amazingš Next one is the 3.5 inch frame to printš Can't wait to fly the new one too!
Thanks for sharing your buildāgreat work on the print and assembly! I see you also used a CF pattern build plate š
Nice touch for using pink TPU and PB&J Ethix props. Clean remix on the action camera mount as well.
Excited to see your 3.5" build next! Remember that you can use those same pink TPU mounts for that build as well. Intentionally designed it that way, making it easy to share the DJI Air Unit between builds.
Mounts for the DJI O4 pro is coming soon, stay tuned š
Happy flying!
Love the frame brotha, wondering if you could make a vtx holder for the GEPRC MATEN 5.8G 1.6W as i would love to make an analog drone out of this frame. 03 and 04s are impossible to get here in canada, it would mean the world to me if you could help me out. either way love your work man!
Very cool design! I'm about to build it. I have a small question: For the flight controller and esc, why you chosen to combine various brands that is Mamba and Foxeer? The stacked options of both brands look comparable and the intuition is telling me components of the same brand can cooperate better. But I might be missing something important...
Great question! I wanted a higher-rated ESC for a bit of extra insurance, and the Foxeer offered the specs I was looking for while still fitting the 20 x 20 mounting pattern. As for the flight controller, I actually already had the Mamba on hand and really like its form factor, so I decided to use it. Youāre absolutely right, either brandās full stack would have worked and presumably integrate better, but I just went with a mix and match approach for my build with what I have on hand š
Great design! Which TPU brand are you using?
For this build, I used GIANTARM Transparent TPU (95A). I believe others TPU's would suffice š
I can't wait to print this frame! What kind of infill do you prefer for the PET-CF parts?
I'm excited to hear you're interested in printing this frame!
For the PET-CF parts, I personally used, and would recommend, 75% - 80% infill density with the Rectilinear pattern. This pattern provides long, continuous lines that help improve stiffness, especially at higher infill percentagesāa great fit for PET-CF parts. In addition, I also used 4 walls, to further improve stiffness.
I'd love to see how your build turns out, so please don't forget to share your make once it's complete!
Great Model, maybe you could make a holder for a Walksnail Moonlight Cam and vtx?
I have an ESC that came with 1000mF capacitor, too big for the prepared hole. I'd need to make the hole bigger (14mm radius). I'm happy to do the modification on my own, but would it be possible to publish the volumetric representation of the model, please, such as f3d? The STL is not that easy to manipulate with. The model I'm interested in is "Bottom Frame (20 x 20 Stack - M2 Holes).STL".
Hi Vladimir,
Sorry for the delayed response, Iāve been busy with other projects. I can make the modification for you with 30.5 Ć 30.5 mm mounting hole spacing, as well as adjust the opening for your capacitor. Will post it shortly š
Thanks!
Thanks a bunch! I believe my build can commence very soon...
In the 30x30 version of frame that was added later - I noticed the spacing between holes is really 30mm. But it seems to me that typically the mounting holes are 30.5mm away https://www.foxeer.com/foxeer-reaper-f4-128k-65a-bl32-4in1-9-40v-esc-30-5-30-5mm-m3-g-420.
Hi I a building this but I have an issue, How I am supposed to mount the F722 mini on my 30x30 esc ? I don't see a file that does it (like a 30x30 to 20X20)
Thanks for reaching out! Unfortunately, I didnāt include a 30x30 to 20x20 adapter in the available part designs. However, these adapters are easy to find, just search for ā30x30 to 20x20 flight controller adapterā and you should see plenty of options.
And If you can, could you design a DJI Air unit 04 Lite version ? it could be soooo great !
I agree, a mount for that is definitely needed and I plan to make one soon. I still need to get a DJI Air Unit 04 Lite for testing, currently I have the DJI 03 and O4 Pro in my collection š.