**_Vogland Orcs_** were created for my YouTube viewers specifically for something fun to easily print and paint. This version shows the largest of the Orcs, the Berserker, complete with his Toffee hammer (the Berserkers love their toffee).  

For a little about Vogland and the inspiration for my miniatures, please click [HERE](https://vegoilguy.co.uk/miniatures.php)

He's much larger than other Vogland Orcs, but you can exchange the head with others already provided by increasing them in size by 20%.

**PUPILS**
To make painting easier, I indented pupils in the eyes. I like how it's turned out. However, I've included a head without sunken pupils who prefer more challenging painting.

If you print or maybe paint him, then please post a pic here, or maybe on Instagram #vogorc

**SUPPORTS**

I've provided **_both supported and unsupported files_**. The Hammer is quite large, so this has been hollowed in my supported version.

**JUST ONE STIPULATION…** if you feature this in Social Media, please name me and provide a Link to this file AND to my YouTube Channel

**FIND ME ON…**
https://cults3d.com/@vogman
https://linktr.ee/vogman 
https://www.youtube.com/@vogman
https://www.instagram.com/the_vogman 
https://www.facebook.com/thevogman 
https://rumble.com/c/VOGMAN 
https://www.patreon.com/vegoilguy 
https://www.etsy.com/shop/VegOilGuy 
http://www.vogman.co.uk 

Vogland Orc Beserker Miniature (with and without supports)

orc-berserker-body-supported.stl

Ask a Mandalorian how you should save money and they will tell you every time, “This is the way!”

Dimensions approx 165mm high by 100mm width.

😁

**USEFUL TIP**

With resin printing, if placed flat on the build plate, because of its shape the Stand will create significant suction forces and may pull itself free of the plate, ruining the print. Personally I raised it 5mm on a lot of fine supports and used the slicer to cut a small hole. This removes the suction force and should print normally.

**JUST ONE STIPULATION...** if you feature this in Social Media, please name me and provide a Link to this file AND to my YouTube Channel

**FIND ME ON...**
https://linktr.ee/vogman 
https://www.youtube.com/@vogman
https://www.instagram.com/the_vogman 
https://www.facebook.com/thevogman 
https://rumble.com/c/VOGMAN 
https://www.patreon.com/vegoilguy 
https://www.etsy.com/shop/VegOilGuy 
http://www.vogman.co.uk 

Mandalorian Piggy Bank - This is the way!!!!

mando-helmet-coin-slot.stl

**VOGLAND CASTLE / TOWER**

This structure is built in small sections for easy printing and is provided here at 32mm scale, though there’s sufficient detail to scale up these structures if you prefer. There’s a choice of Arched window or Arrow Slots, and you can make the tower as tall as you wish thanks to the easy stacking system.

👉 **FOLLOW ME... AND TELL ME WHAT OTHER FREE PRINTS YOU'D LIKE TO SEE...** 👈

For a little about Vogland and the inspiration for my miniatures, please click [HERE](https://vegoilguy.co.uk/miniatures.php)

I featured this castle in a YouTube video that you may enjoy:
https://youtu.be/46yy616G37U

**IMPORTANT – RESIN PRINTING**

There are a lot of projections on these models, thanks to the rough surfaces of the stonework. Whilst I have strived to ensure that these should print without supports (if printed parallel to the build plate), it’s possible some artifacts may occur upon the FEP and in the resin. For this reason I recommend after EVERY print, filter the resin and clean the FEP. 

**SUPPORTS** 

I designed this model to print support-free when placed flat on the build plate. This is perfect for FDM of course, but with resin prints this can lead to a slight tide mark print flaw. For this reason resin prints are best done on an angle, so I have provided OPTIONAL  pre-supported Resin print STLs as well. But the choice is yours.

**JUST ONE STIPULATION...** if you feature this in Social Media, please name me and provide a Link to this file AND to my YouTube Channel

**FIND ME ON...**
https://cults3d.com/@vogman
https://linktr.ee/vogman 
https://www.youtube.com/@vogman
https://www.instagram.com/the_vogman 
https://www.facebook.com/thevogman 
https://rumble.com/c/VOGMAN 
https://www.patreon.com/vegoilguy 
https://www.etsy.com/shop/VegOilGuy 
http://www.vogman.co.uk 

Vogland Castle / Tower (support free)

top-floor-RESIN-PRINT-SUPPORTED.stl

**VOGLAND CASTLE DICE TOWER**
Embark on epic adventures with this highly detailed Vogland Castle Dice Tower, a phenomenal addition to your miniature fantasy world.

👉 **FOLLOW ME... AND TELL ME WHAT OTHER FREE PRINTS YOU'D LIKE TO SEE...** 👈

After receiving requests, this miniature fantasy detailed **dice tower**, which was originally crafted as a 32mm Castle Tower ([HERE](https://thangs.com/designer/VOGMAN/3d-model/980377)), has been restructured to include arched windows, arrow slots, and a twisty internal tube for rolling the dice.

For a little about Vogland and the inspiration for my miniatures, please click [HERE](https://vegoilguy.co.uk/miniatures.php)

**SECTIONS**
The castle / tower is divided into separate, stackable sections for easier printing via **both Resin and FDM** methods. In addition to the practical stud and socket design for secure assembly, the model includes witness marks for clear alignment. Furthermore, the rough stonework gives an authentic castle feel to the 3D model. 

**DICE SIZE**
Fulfilling your RPG and tabletop gaming needs, this 3D fantasy miniature, designed with utmost attention to detail, is categorized to fit dice of 20mm size or smaller. However, you can easily upscale the model to incorporate larger dice - for instance, scale files to 116% for a 23mm door opening or 125% for 25mm. 

**SUPPORTS**
This 3D model is designed to print with minimal support, while some might be necessary from the plate to the underside.

**IMPORTANT – RESIN PRINTING**
For resin prints, we recommend filtering the resin and cleaning the FEP after each print. 

**SHARE YOUR EXPERIENCE**
We invite you to share our work on social media. We only request that you credit us with a link to this file and our YouTube Channel. You can discover more VogMan creations on YouTube, Cults 3D, Instagram, Facebook, Rumble, Patreon, Etsy, and personal website. 

https://cults3d.com/@vogman
https://linktr.ee/vogman 
https://www.youtube.com/@vogman
https://www.instagram.com/the_vogman 
https://www.facebook.com/thevogman 
https://rumble.com/c/VOGMAN 
https://www.patreon.com/vegoilguy 
https://www.etsy.com/shop/VegOilGuy 
http://www.vogman.co.uk 

Vogland Castle Dice Tower

floor-one-decd.stl

top-floor-decd.stl

This **Vogland Orc** was created for my YouTube viewers specifically for something fun to easily print and paint. This version finds the Vogland Hogrider sitting upon his magnificent steed, the infamous Vogland Suicide Pig. Whilst small and cute in stature, the Vogland Pig has probably the tastiest meat in Vogland. However, nature has been kind to it, giving it incredible strength and such a violent disposition that trying to eat one is tantamount to Suicide. Probably for this reason, they’ve struck up an uneasy alliance with the Vogland Orcs, whereby neither species eats the other.

For a little about Vogland and the inspiration for my miniatures, please click [HERE](https://vegoilguy.co.uk/miniatures.php)

When printed and assembled, he stands approx 50mm. There are both supported and unsupported STLs.

**_If you print and paint him, then please post a pic on Instagram #vogorc_**

**ORC BACKGROUND**

So I’ve had a few questions about the Vog Orc, mostly along the lines of, “Where’s his trousers?”
Well, this is because the Orc’s of Vogland are a strange breed. Fiercely proud of their shiny codpieces, they typically wear nothing else, other than a stout pair of boots. 
Even their armour is skimpy. Vogland Orc’s generally stare across the battlefield, locking eyes with their foes, and polishing their codpieces with great enthusiasm. This alone is usually enough to disturb the enemy.
Download the Vog Orc and paint him any way you like… just have fun doing it and don’t take it too seriously. That way lies madness!

**JUST ONE STIPULATION**... if you feature this in a YouTube video, please name me and provide a Link to this file **AND** to [my YouTube Channel](https://www.youtube.com/@vogman)

**FIND ME ON...**
https://linktr.ee/vogman 
https://www.youtube.com/@vogman
https://www.instagram.com/the_vogman 
https://www.facebook.com/thevogman 
https://rumble.com/c/VOGMAN 
https://www.patreon.com/vegoilguy 
https://www.etsy.com/shop/VegOilGuy 
http://www.vogman.co.uk 

Vogland Orc Hogrider miniature

body-hogrider-supported.stl

This **Vogland Orc** was created for my YouTube viewers specifically for something fun to easily print and paint. This version finds the Vogland Orc in his most natural state, wearing nothing but boots, a shiny codpiece, his favourite polishing gloves and a look of grim determination.

For a little about Vogland and the inspiration for my miniatures, please click [HERE](https://vegoilguy.co.uk/miniatures.php)

When printed and assembled, he stands approx 50mm. There are both supported and unsupported STLs.

**PAINTING TUTORIAL**

This guy really is easy to paint using the Slapchop method. I did video painting tutorial which you may enjoy: https://youtu.be/74sokkUFPHQ 

**_If you print and paint him, then please post a pic on Instagram #vogorc_**

**ORC BACKGROUND**

So I’ve had a few questions about the Vog Orc, mostly along the lines of, “Where’s his trousers?”
Well, this is because the Orc’s of Vogland are a strange breed. Fiercely proud of their shiny codpieces, they typically wear nothing else, other than a stout pair of boots. 
Even their armour is skimpy. Vogland Orc’s generally stare across the battlefield, locking eyes with their foes, and polishing their codpieces with great enthusiasm. This alone is usually enough to disturb the enemy.
Download the Vog Orc and paint him any way you like… just have fun doing it and don’t take it too seriously. That way lies madness!

**JUST ONE STIPULATION**... if you feature this in a YouTube video, please name me and provide a Link to this file **AND** to [my YouTube Channel](https://www.youtube.com/@vogman)

**FIND ME ON...**
https://linktr.ee/vogman 
https://www.youtube.com/@vogman
https://www.instagram.com/the_vogman 
https://www.facebook.com/thevogman 
https://rumble.com/c/VOGMAN 
https://www.patreon.com/vegoilguy 
https://www.etsy.com/shop/VegOilGuy 
http://www.vogman.co.uk 

Vogland Orc Au Naturel miniature

head-orc-au naturel-SUPPORTED.stl

This **Vog Orc** was created for my YouTube viewers specifically for something fun to easily print and paint. I was exploring the Slapchop painting technique at the time and thought this little guy would work perfectly for that.

For a little about Vogland and the inspiration for my miniatures, please click [HERE](https://vegoilguy.co.uk/miniatures.php)

When printed and assembled, he stands approx 50mm. There are both supported and unsupported STLs.

**_If you print and paint him, then please post a pic on Instagram #vogorc_**

**ORC BACKGROUND**

So I’ve had a few questions about the Vog Orc, mostly along the lines of, “Where’s his trousers?”
Well, this is because the Orc’s of Vogland are a strange breed. Fiercely proud of their shiny codpieces, they typically wear nothing else, other than a stout pair of boots. 
Even their armour is skimpy. Vogland Orc’s generally stare across the battlefield, locking eyes with their foes, and polishing their codpieces with great enthusiasm. This alone is usually enough to disturb the enemy.
Download the Vog Orc and paint him any way you like… just have fun doing it and don’t take it too seriously. That way lies madness!

**JUST ONE STIPULATION**... if you feature this in a YouTube video, please name me and provide a Link to this file **AND** to [my YouTube Channel](https://www.youtube.com/@vogman)

**FIND ME ON...**
https://cults3d.com/@vogman
https://linktr.ee/vogman 
https://www.youtube.com/@vogman
https://www.instagram.com/the_vogman 
https://www.facebook.com/thevogman 
https://rumble.com/c/VOGMAN 
https://www.patreon.com/vegoilguy 
https://www.etsy.com/shop/VegOilGuy 
http://www.vogman.co.uk 

Vogland Orc miniature

head-supported.stl

For a bit of fun I created a Stormtrooper ring and cast it in metal ( see my video https://youtu.be/3OFThoa5byw ).

The ring has an internal diameter of 24mm so you'll probably have to shrink it down to fit.

👉 **FOLLOW ME... AND TELL ME WHAT OTHER FREE PRINTS YOU'D LIKE TO SEE...** 👈

This is a remix of a large scale helm provided by YummiCHEESE. My thanks :-)
https://thangs.com/designer/YummiCHEESE/3d-model/Star-wars-Clone-Helm-phase-2-11173


FIND ME ON...
https://www.youtube.com/@vogman
https://www.instagram.com/the_vogman
https://www.facebook.com/thevogman
https://www.patreon.com/vegoilguy
https://www.etsy.com/shop/VegOilGuy

Star Wars Stormtrooper Clone character ring

For a bit of fun I created a Stormtrooper ring and cast it in metal ( see my video https://youtu.be/3OFThoa5byw ).

The ring has an internal diameter of 24mm so you'll probably have to shrink it down to fit.

This is a remix of a large scale helm provided by YummiCHEESE. My thanks :-)
https://thangs.com/designer/YummiCHEESE/3d-model/Star-wars-Clone-Helm-phase-2-11173

Further to the incredible Photonsters PTC Heater Unit given to us by X3msnake (https://www.thingiverse.com/thing:3442165 ) , I looked for an alternative support mechanism to magnets. With that in mind I designed two very basic holders:
1) A corner support to fit inside the lid of large printers like the Mono X and Saturn.
2) A simple forward facing holder. Mine fits easily in my Mars 2 Pro.

I confess I haven't printed no.2 since tinkering, so if it isn't right, let me know. But in principle...

a) Print the holder
b) Check it fits inside the lid without interfering with the Z Arm and plate
c) Bond the holder in position with strong adhesive
d) Push the heater in

DONATIONS
Please give donations to the original creator, X3msnake, who came up with this excellent idea https://www.thingiverse.com/thing:3442165

FIND ME ON...
https://www.youtube.com/@vogman
https://www.instagram.com/the_vogman
https://www.facebook.com/thevogman
https://www.patreon.com/vegoilguy
https://www.etsy.com/shop/VegOilGuy

Photonsters PTC Heater Unit HOLDER

Further to the incredible Photonsters PTC Heater Unit given to us by X3msnake (https://www.thingiverse.com/thing:3442165 ) , I looked for an alternative support mechanism to magnets. With that in mind I designed two very basic holders:
1) A corner support to fit inside the lid of large printers like the Mono X and Saturn.
2) A simple forward facing holder. Mine fits easily in my Mars 2 Pro.

I confess I haven't printed no.2 since tinkering, so if it isn't right, let me know. But in principle...

a) Print the holder
b) Check it fits inside the lid without interfering with the Z Arm and plate
c) Bond the holder in position with strong adhesive
d) Push the heater in

DONATIONS
Please give donations to the original creator, X3msnake, who came up with this excellent idea https://www.thingiverse.com/thing:3442165

FIND ME ON...
https://www.youtube.com/vegoilguy
https://www.instagram.com/vegoilguy

Further to the incredible Photonsters PTC Heater Unit given to us by X3msnake (https://www.thingiverse.com/thing:3442165 ) , I looked for an alternative support mechanism to magnets. With that in mind I designed two very basic holders:
1) A corner support to fit inside the lid of large printers like the Mono X and Saturn.
2) A simple forward facing holder. Mine fits easily in my Mars 2 Pro.

I confess I haven't printed no.2 since tinkering, so if it isn't right, let me know. But in principle...

a) Print the holder
b) Check it fits inside the lid without interfering with the Z Arm and plate
c) Bond the holder in position with strong adhesive
d) Push the heater in

DONATIONS
Please give donations to the original creator, X3msnake, who came up with this excellent idea https://www.thingiverse.com/thing:3442165

**FIND ME ON...**
https://www.youtube.com/@vogman
https://www.instagram.com/the_vogman
https://www.facebook.com/thevogman
https://www.patreon.com/vegoilguy
https://www.etsy.com/shop/VegOilGuy

corner-heater-support-cover.stl

heater-support.stl

My take on the playing court of the Squid Games. It's not 100% accurate, just similar enough to give the idea. 

Squid Games court

For a bit of fun, I took three excellent Thangs and tweaked them a little to create an evil Baby Yoda. Is Grogu going to become a force for the light or the dark side in Disney's Star Wars - The Mandalorian? I don't know, but if he looks like this, don't buy a second hand 3D printer off him.

👉 **FOLLOW ME... AND TELL ME WHAT OTHER FREE PRINTS YOU'D LIKE TO SEE...** 👈

My thanks to the original artists whose superior work made mine possible.

https://thangs.com/krisz0422/BABY-YODA-SOUP-18146

https://thangs.com/ameerawwad/skull-with-mandibule-15080

https://thangs.com/norahcs203/custom-lightsaber-hilt-stl-7147

I did an accompanying video to this download showing the processes involved. You can see this here - https://youtu.be/7xP_nSLuAQk

**FIND ME ON...**
https://www.youtube.com/@vogman
https://www.instagram.com/the_vogman
https://www.facebook.com/thevogman
https://www.patreon.com/vegoilguy
https://www.etsy.com/shop/VegOilGuy

Evil baby Yoda (Grogu)

For a bit of fun, I took three excellent Thangs and tweaked them a little to create an evil Baby Yoda. Is Grogu going to become a force for the light or the dark side in the Mandalorian? I don't know, but if he looks like this, don't buy a second hand 3D printer off him.

My thanks to the original artists whose superior work made mine possible.

https://thangs.com/krisz0422/BABY-YODA-SOUP-18146

https://thangs.com/ameerawwad/skull-with-mandibule-15080

https://thangs.com/norahcs203/custom-lightsaber-hilt-stl-7147

I created this 3D print to celebrate the March Madness NCAA Men’s Basketball of 2019. At the suggestion of my subscribers, I recreated the Kentucky Wildcats mascot in a semi 3d format, in my case especially to convert the print to bronze through Lost PLA Casting. With the background sprayed black and the top face polished, it creates a nice relief.

I had to take a few design liberties to replicate the mascot on the smaller scale. It prints at roughly 67mm wide, which is just a tad over 2.5 inches.

For my Patreon supporters, there's an even larger, more detailed STL file available. See my Patreon page https://www.patreon.com/vegoilguy

I hope all the Wildcat fans out there enjoy it : )

JUST ONE STIPULATION... if you feature this in a YouTube video, please name me as the Creator and provide a Link to this file and to my video (below). Obviously I cannot grant any commercial rights as this mascot does not belong to me and was created purely to pay tribute to the team, the supporters and the sport.

https://youtu.be/KBqDQv5ybVY

Kentucky Wildcats Mascot

This is a rework of the excellent design by Alajaz ( www.thingiverse.com/thing:831304 ). I wanted to make a Brass Monkey using Lost PLA Casting and whilst I loved the original, it was a little thin in places. So I simplified the design, thickened it in places, and gave the monkey a cheeky smile.

It is quite small, just 30mm tall and 5mm deep, as I wanted a metalworking challenge, but the size of it works as jewellery.

There’s two files here – one that’s useable as a pendant and one that isn’t.

JUST ONE STIPULATION... if you feature this in a YouTube video, please name me as the Creator and provide a Link to this file and to my video (below).

https://youtu.be/tXJ_MuffQd0

Monkey Pendant

This is a small Saxon Cross pendant that I designed within Fusion 360 whilst making a YouTube video. I recently started experimenting with Lost PLA Casting (converting 3D Prints into metal) and I wanted to share my experiences.

For those interested in either doing the same, or perhaps simply because they like the look of the piece, I'm happy to share.

There's two files, one with a small hole to accept a string or fine chain, and the other as a solid cross.

JUST ONE STIPULATION... if you feature this in a YouTube video, please name me as the Creator and provide a Link to this file.

https://youtu.be/9fMg6pC4xQo

Saxon Cross Pendant

saxon-cross-pendant.stl

These are some Halloween Pumpkin Cufflinks designed for fun and for inclusion on my YouTube Channel. For me it was about using castable resin and making a set of metal cufflinks, but a PLA pair would work just as well : )

JUST ONE STIPULATION... if you feature these in a YouTube video, please name me as the Creator and provide a Link to this file AND to my follow my YouTube Channel.

https://youtu.be/HwfjN3o_URw

**FIND ME ON...**
https://www.youtube.com/@vogman
https://www.instagram.com/the_vogman
https://www.facebook.com/thevogman
https://www.patreon.com/vegoilguy
https://www.etsy.com/shop/VegOilGuy

Halloween Pumpkin Cufflinks

These are some Halloween Pumpkin Cufflinks designed for fun and for inclusion on my YouTube Channel. For me it was about using castable resin and making a set of metal cufflinks, but a PLA pair would work just as well : )

JUST ONE STIPULATION... if you feature these in a YouTube video, please name me as the Creator and provide a Link to this file AND to my follow my YouTube Channel.

https://youtu.be/HwfjN3o_URw

To most viewers this will mean nothing, but to some who follow my YouTube Channel, this is the Casting Tree that I've been developing - seen in several of my videos now.

Those familiar with John Campbell's Casting Handbook will be aware of the concept of a tapered sprue and pouring basin, devices typically included in sand casting to reduce porosity, prevent metal contamination and smooth the flow. I have taken these concepts and introduced them to the casting tree with, so far at least, great success.

It fits perfectly on a steel flask that has a outer diameter of 102mm and is no greater than 150mm tall. If you're in the UK and want to buy one, drop me a line on YouTube or via my website and I'll tell you which online store sells them.

To attach items to the main sprue (the trunk) I use positioning wax. This is wonderfully sticky stuff that holds very well and evaporates perfectly during burnout. Again this can be seen in most of my videos - like the one below.

JUST ONE STIPULATION... if you feature this in a YouTube video, please name me as the Creator and provide a Link to this file and to my channel.

https://youtu.be/o4SuFNP9CRk

Lost PLA Casting Tree with Tapered Sprue & Pouring Basin

This is a 4:1 stackable Planetary Gearbox, designed with just enough slack in the system to mean it should work perfectly first time. I've printed a few other such gearboxes and couldn't get them to work because the tolerances were too high... this shouldn't be a problem here. Stackable means you can print two or more gearboxes and insert them into each other, increasing the overall output ratio, ie 4:1, 16:1, 64:1, etc. 
VERY easy print - no supports required) and the video below demonstrates how things are easily fitted together.

JUST ONE STIPULATION... if you feature this in a YouTube video, please name me as the Creator and provide a Link to this file AND to my follow my YouTube Channel.

https://youtu.be/0ow4x0jadJY

Planetary Gearbox 4:1 Stackable

sun.stl

This is a small Celtic Knot pendant that I designed within Fusion 360 whilst making a YouTube video. I was experimenting with Lost PLA Casting (converting 3D Prints into metal) at the time and I wanted to share my experiences.

👉 **FOLLOW ME... AND TELL ME WHAT OTHER FREE PRINTS YOU'D LIKE TO SEE...** 👈

For those interested in either doing the same, or perhaps simply because they like the look of the piece, I'm happy to share.

JUST ONE STIPULATION... if you feature this in a YouTube video, please name me as the Creator and provide a Link to this file.

https://youtu.be/9fMg6pC4xQo

Celtic Knot Pendant

This is a small Celtic Knot pendant that I designed within Fusion 360 whilst making a YouTube video. I was experimenting with Lost PLA Casting (converting 3D Prints into metal) at the time and I wanted to share my experiences.

For those interested in either doing the same, or perhaps simply because they like the look of the piece, I'm happy to share.

JUST ONE STIPULATION... if you feature this in a YouTube video, please name me as the Creator and provide a Link to this file.

https://youtu.be/9fMg6pC4xQo

120K+ YouTuber loving #3DPrinting, #3dmodeling, Tech Reviews, Tutorials, Melting Metal, DIY and other crazy stuff

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

VOGMAN

Achievements

Explorer

Seedling

Fan Favorite