F-15 EAGLE JOYSTICK GRIP BY THESIMNET video thumbnail

F-15 EAGLE JOYSTICK GRIP BY THESIMNET

35 downloads · 2 years ago · This is a scale re-creation of an F-15 Joystick Grip based on a lidar scan. This grip is ready to be

Purchase model for $12 USD

This model is restricted by licensing terms.

View license.

Description

This is a scale re-creation of an F-15 Joystick Grip based on a lidar scan. This grip is ready to be combined with the electronics mentioned below to form a fully functional simulator joystick grip. For more details see this video: https://youtu.be/Fe2dHtFJDu8

Compatible with Thrustmaster/Virpil/VKB Bases (VKB only with adapter and some soldering)

Assembly video coming soon!

Full BOM Below: 3x CD4021 Shift Register

3x 9-Pin 10k Resistor Networks

1x 10k Through Hole Resistor

1x 100nF Through Hole Ceramic Capacitor

1x 5-Pin Mini Din Male Connector

Thru-hole 5-way Navigation switch (https://www.adafruit.com/product/504)

2x Momentary Push Button Switch AC 250V 2A/120V 5A NO/NC SPDT - 8121SHZGE style button with red caps - 3-Pin

2x Mini Micro Limit Switch 5A 125 250V AC SPDT 1NO 1NC Momentary Switch Snap Action Button Type 3 Pins (no lever)

1x Torsion Spring 5mm OD or Compression spring OD 8mm (can use both for double the return force)

13x M3 Screws Total: 4x M3x20 9x M3x16

Trigger instructions here: https://www.thingiverse.com/thing:6289942

Debolestis PCB Available Here: https://oshpark.com/shared_projects/OTJrlwA4

ALPS Switches Alps RKJXM1015004

Per ALPS PCB: Quantity 4x: CUS05S40,H3F Schottky Diode Quantity 7x: RNCP0805FTD1K00 Chip Resistor - Surface Mount 1 kOmh Quantity 2x: MMBT3904-TP Surface Mounted Transistor Quantity 1 Alps RKJXM1015004

My PCBWay referral link: https://pcbway.com/g/jwr15D

Assorted Dupont Wires 20 AWG

Tags:

Discussions

c5.piscitelli2 years ago

I purchased the kit for a different possible use. I am building a Vans RV-8 and am going to attempt to turn the files into a mold that I can use for carbon fiber forging into a stick grip for the plane. Will see how it goes. Thanks for a great file to build off of.

TheSimNet2 years ago

Hi if you need a model that you can print in one piece for a mold, I would be happy to help! You can email me directly at questions@thesimnet.com

rick13102 years ago

I purchased the kit but its my first time trying to build a joystick and I'm struggling a bit with the PCB and parts list information. Is there any way we could get a little more breakdown on the components to purchase separated by using PCBWay or not? I just don't want to purchase too many parts. I also can't seem to figure out how to get PCB way to partially assemble the board like in your video. Either way, amazing piece of kit! Thank you!