Profile Image
TIMUX
TIMUX

TIMUX

Follow

Select a membership plan

Model is included in this plan
Available now

PRINT AND SELL
$10.00
/ month

With this plan you receive:

  1. COMMERCIAL LICENSE - As an ACTIVE member, you will have a Commercial License to legally sell PHYSICAL prints of any of the designs. UPON CANCELLATION of the subscription, THIS COMMERCIAL LICENSE EXPIRES. Digital files cannot be modified, shared, resold, or listed for free.

  2. FREE DESIGNS - We will release at least 4 designs per month. As a member, you will have access to download for free 4 designs per month, you can choose between all of the models of the catalog. However, if you want to download more designs all the files you want are available in Cults3D, and the Commercial License includes the purchased models in that site.

  3. EXCLUSIVE DESIGNS - We will release unique designs that can be a new project or an upgrade of an existing design. This designs will be available only for the members.

  4. EARLY ACCESS - You will have an Early Access period before each design gets released to other platforms.

TIMUX
TIMUX

ROBERT PLANT YOGA DHANURASANA POSE

by
TIMUX
TIMUX
TIMUX
TIMUX
|
Image 1 of 4
ROBERT PLANT YOGA DHANURASANA POSE 3d model
TIMUX
TIMUX
|
Image 1 of 4
ROBERT PLANT YOGA DHANURASANA POSE 3d model
2D
3D
Makes
ROBERT PLANT YOGA DHANURASANA POSE 3d model
ROBERT PLANT YOGA DHANURASANA POSE 3d model
ROBERT PLANT YOGA DHANURASANA POSE 3d model
ROBERT PLANT YOGA DHANURASANA POSE 3d model

ROBERT PLANT YOGA DHANURASANA POSE

It's a robert plant pot doing the dhanurasana pose.

The size of the pot where the plant goes is 80 mm in diameter and 60 mm high, it has drainage.

There are two parts, the body and the yoga mat that fits together, but it's recommended to glue them for more stability, enjoy printing! :)

Need supports only in the arms, the head doesn't need it. We recomend to use tree or organic supports. For the yoga mat it's recommend to use a wall thickmess of 1.6 mm (4 perimeters) so have a strong joint point.


1 Likes1 DownloadsSeptember 16, 2024

Instructions

Filament • 0.12mm

MaterialPLA+
Layer height0.12 mm
Infill density10 %
SupportsTree
BrimNo