A drawer organizer built to fit the specific dimensions of my side table drawers. 

Included in 1-part and 2-part configurations as my print bed was too small for the full size. 

Tinkercad link here to resize to your own needs: https://www.tinkercad.com/things/iSVZtPRkT3a?sharecode=UMN_CrgSewV9nFeGMLq_zhRaZ5UNOf814bme-BI0QtU

Drawer Organizer

Drawer organizer v3 Full.stl

Remix of Simple Heart Box with Lid by 3dprintbunny for the Thangs Valentine’s Day Contest

This includes customizable initials on the lid for you and your sweetheart or any other messages.

Download for the "Info.txt" with a link to Tinkercad file for easier editing of the initials to you and your sweetheart.

Don't forget to post your remix to Thangs!

Simple Heart Box with Lid Remix "I Love Us"

DISPLAY ONLY Remix of Heart Box with Initials Lid ILU.stl

Remix of Heart Box with Initials Lid ILU.stl

Simple Heart Box with Lid Remix "I Love You"

DISPLAY ONLY Remix of Heart Box with Initials ILY.stl

Remix of Heart Box with Initials Lid ILY.stl

Remix of Simple Heart Box with Lid by 3dprintbunny for the Thangs Valentine’s Day Contest

This includes customizable initials on the lid for you and your sweetheart or any other messages. 

Download for the "Info.txt" with a link to Tinkercad file for easier editing of the initials to you and your sweetheart.


Don't forget to post your remix to Thangs!

Initials Simple Heart Box with Lid Remix "You+Me"

DISPLAY ONLY Remix of Heart Box with Initials YouMe.stl

Remix of Heart Box with Initials Lid YouMe.stl

Remix of Simple Heart Box with Lid by 3dprintbunny for the Thangs Valentine’s Day Contest

This includes customizable initials on the lid for you and your sweetheart.

Download for the "Info.txt" with a link to Tinkercad file for easier editing of the initials to you and your sweetheart.


Don't forget to post your remix to Thangs!

Initials Simple Heart Box with Lid Remix "K+R"

DISPLAY ONLY Remix of Heart Box with Initials KR.stl

Remix of Heart Box with Initials Lid KR.stl

Initials Simple Heart Box with Lid Remix "H+S"

DISPLAY ONLY Remix of Heart Box with Initials HS.stl

Remix of Heart Box with Initials Lid HS.stl

Initials Simple Heart Box with Lid Remix "J+M"

DISPLAY ONLY Remix of Heart Box with Initials JM.stl

Remix of Heart Box with Initials Lid JM.stl

Initials Simple Heart Box with Lid Remix "J+S"

DISPLAY ONLY Heart Box Remix.stl

Initials Heart Box Remix Lid.stl

These are a set of bins I designed specifically for a built-in in my apartment. This one measures 8 inches wide by 5 inches deep by 9 inches (ish) tall (sorry for the units my EU friends).

I've found PETG performs best with this particular model. PLA works, however I usually had a lot of cleanup on the stringing in the hexes afterwards, whereas PETG @ 230c and 150 mm/s worked nearly flawlessly without any stringing.  Please comment your successful settings though as I am still having trouble getting the floor of the bin to print without blistering when using Concentric patterns or the like.

Designed in Tinkercad, the hex pattern is a repeating pattern trimmed on the edges, so re-sizing to whatever dimensions you need should be pretty simple, but message me if you need a particular set of dimensions and I might take a crack at it if I have time. Tinkercad file below to remix with if you want:
https://www.tinkercad.com/things/hZ36bubRkEJ?sharecode=ZK1efOMKQ0vd52pIDA50fgz2jkDBfDEKqysG56LNbEQ


4" Version "A"
https://social.thangs.com/m/649293

Honeycomb Hex Bin "B"

These are a set of bins I designed specifically for a built-in in my apartment. This one measures 8 inches wide by 5 inches deep by 9 inches (ish) tall (sorry for the units my EU friends).

I've found PETG performs best with this particular model. PLA works, however I usually had a lot of cleanup on the stringing in the hexes afterwards, whereas PETG @ 230c and 150 mm/s worked nearly flawlessly without any stringing.  Please comment your successful settings though as I am still having trouble getting the floor of the bin to print without blistering when using Concentric patterns or the like.

Designed in Tinkercad, the hex pattern is a repeating pattern trimmed on the edges, so re-sizing to whatever dimensions you need should be pretty simple, but message me if you need a particular set of dimensions and I might take a crack at it if I have time. Tinkercad file below to remix with if you want:
https://www.tinkercad.com/things/hZ36bubRkEJ?sharecode=ZK1efOMKQ0vd52pIDA50fgz2jkDBfDEKqysG56LNbEQ

These are a set of bins I designed specifically for a built-in in my apartment. This one measures 4 inches wide by 5 inches deep by 9 inches (ish) tall (sorry for the units my EU friends). 

After 8 iterations, redesigns and reprints, I've found PETG performs best with this particular model. PLA works, however I usually had a lot of cleanup on the stringing in the hexes afterwards, whereas PETG @ 230c and 150 mm/s worked nearly flawlessly without any stringing.  Please comment your successful settings though as I am still having trouble getting the floor of the bin to print without blistering when using Concentric patterns or the like. 

Designed in Tinkercad, the hex pattern is a repeating pattern trimmed on the edges, so re-sizing to whatever dimensions you need should be pretty simple, but message me if you need a particular set of dimensions and I might take a crack at it if I have time. Tinkercad file below to remix with if you want:
https://www.tinkercad.com/things/hZ36bubRkEJ?sharecode=ZK1efOMKQ0vd52pIDA50fgz2jkDBfDEKqysG56LNbEQ


8" Version "B"
https://social.thangs.com/m/649379

Honeycomb Hex Bin "A"

These are a set of bins I designed specifically for a built-in in my apartment. This one measures 4 inches wide by 5 inches deep by 9 inches (sorry for the units my EU friends). 

After 8 iterations, redesigns and reprints, I've found PETG performs best with this particular model. PLA works, however I usually had a lot of cleanup on the stringing in the hexes afterwards, whereas PETG @ 230c and 150 mm/s worked nearly flawlessly without any stringing.  Please comment your successful settings though as I am still having trouble getting the floor of the bin to print without blistering when using Concentric patterns or the like. 

Designed in Tinkercad, the hex pattern is a repeating pattern trimmed on the edges, so re-sizing to whatever dimensions you need should be pretty simple, but message me if you need a particular set of dimensions and I might take a crack at it if I have time. Tinkercad file below to remix with if you want:
https://www.tinkercad.com/things/hZ36bubRkEJ?sharecode=ZK1efOMKQ0vd52pIDA50fgz2jkDBfDEKqysG56LNbEQ



Loved the design of JannickSchulz' H Candle Holder, but I wanted to use it for a large candle instead of a votive. Remixed for a near filling candle, I am using in a decorative use case though, some candle might have a flat too close to the edges to be safe/not melt/warp the PLA, so I'd recommend a higher temp-resistant material in those cases.

Original model: https://www.thingiverse.com/thing:4237256

 Hexagon Candle Holder Remix

Loved the design of JannickSchulz' H Candle Holder, but I wanted to use it for a large candle instead of a votive. Remixed for a near filling candle, I am using in a decorative use case though, some candle might have a flat too close to the edges to be safe/not melt/warp the PLA, so I'd recommend a higher temp-resistant material in those cases.

A simple desk container for 3 sticky notes in 2 sizes (designed for Post-it standard 1/2"x2" and 3"x3" sizes). I recommend printing with concentric top/bottom layers for a nicer finish. 

I add felt pads to the bottom to avoid any surface damage of a desk, but not necessarily needed. 

Sticky Note Container

A composite remix of ivan's "Headband" from Printables and Maker 0824's "Lego Brick" from Thingiverse. It provides Lego-compatible mounting points for small builds or minifigs. 

Original Headband model:
https://www.printables.com/model/344924

Original Lego model:
https://www.thingiverse.com/thing:4532105

Lego Headband

Lego Headband.stl

A dabbler in VR, game design, 3d modeling, screenwriting, filmmaking, photography.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Sweetzer

Achievements

Seedling

Debutant

Voyager

Amateur Maker