3 Likes10 DownloadsAugust 13, 2024
Instructions
Filament • 0.3mm
MaterialPETG
Layer height0.3 mm
Infill density15 %
SupportsNone
BrimYes
Material BrandsSunlu
Nozzle size0.4 mm
Simple Item to hold my notebooks upright. Holds 3 notebooks. I couldn't find anything remotely close on any website. I printed with 15% infill. with PETG. I printed with bottom layer thickness of 3 MM so it was less likely to flip over. I don't know if necessary. I used PETG from Sunlu. Sliced with OrcaSlicer and then printed on my Anker M5C. Took me 8 Hrs to print but YMMV.
Categories:
3 Likes10 DownloadsAugust 13, 2024
3 Likes10 DownloadsAugust 13, 2024
Instructions
Filament • 0.3mm
MaterialPETG
Layer height0.3 mm
Infill density15 %
SupportsNone
BrimYes
Material BrandsSunlu
Nozzle size0.4 mm