tracking pixel
S

Kywoo Tycoon Vertical Mainboard Mount

by
Soliptic
Follow
Follow
Remix Model
S
Soliptic
Image 1 of 3
Kywoo Tycoon Vertical Mainboard Mount 3d model
2D
3D
Makes
Kywoo Tycoon Vertical Mainboard Mount 3d model
Kywoo Tycoon Vertical Mainboard Mount 3d model
Kywoo Tycoon Vertical Mainboard Mount 3d model
2 Likes11 DownloadsFebruary 28, 2022


This is a mount for the Tycoon and Tycoon Max printers from Kywoo 3d. This is a fantastic printer held back by some blackbox firmware and mainboard parings. This mount allows a Raspberry Pi and SKR Mini E3 v3 to be attached to the existing frame in a vertical orientation and also adds an 80mm fan for cooling which the stock printer lacks.

Hardware Needed:

  • 2020 T-Slot M3 Nuts x6
  • M3 Screws
  • M2 Screws
  • M5 Screws x2-4

Recommended Print Settings:

  • 4 Perimeters
  • 30-35% Infill

Notes:

  • Print the Anchor Top and Bottom pieces twice. One is for the top, one is for the lower fan to attach to.
  • There are a number of thin parts that may break if brittle filament is used (eg: PLA) or perimeters aren't 3+.

2 Likes11 DownloadsFebruary 28, 2022




2 Likes11 DownloadsFebruary 28, 2022