**Simple Pocket Clip Mount for Multiboard**

For tape measures, utility knives, etc.

Comes with washers (4 and 8mm) you can print to space it from your board or you could use the [multiboard washers](https://thangs.com/search/%22MB87%22%20creator%3A%22Keep%20Making%22?scope=thangs&view=list)

Mounts to your multiboard using [small thread bolts](https://www.multiboard.io/parts-library/bolts)

Pocket Clip Mount for Multiboard.stl

Pocket Clip Mount 25mm.stl

**Push Fit Nuts**

An additional option for your Multiboard mounting needs

Turn your threaded mounts into push fit mounts for easier mounting and unmounting

Available in 9, 10, 13mm, 20mm, and 30mm lengths

Great option for mounting bins (https://than.gs/m/999446), small shelves, multiboard tiles, etc.

the small threads and hook ends go into the multiboard small holes and will snap into place if oriented correctly 25mm apart (similar to the pegboard click)



**[Vertical Bin](https://than.gs/m/999446) Mounting**

This was made to be used for  these [bins and sleeves](https://than.gs/m/999446)
in order to mount these bins or other items without the multiboard threads, you'll need a [bolt with a small thread](https://thangs.com/designer/Keep%20Making/3d-model/Small%20Threads%20-%20STEP%20Multiboard%20Remixing%20Files-994680) preferrably a T-Bolt

Push Fit Nuts for Multiboard

Small Thread Push Fit Adapter-9mm.stl

Small Thread Push Fit Adapter-10mm.stl

Small Thread Push Fit Adapter-13mm.stl

Small Thread Push Fit Adapter-20mm.stl

Small Thread Push Fit Adapter-30mm.stl

**Pegboard Click T-Bolts**

An additional option for your Multiboard mounting needs 

Available in 5-10mm lengths in 1mm increments as well as 13mm, 20mm, and 30mm lengths

Great option for mounting bins (https://than.gs/m/999446), small shelves, multiboard tiles, etc.

the small threads and hook ends go into the multiboard small holes and will snap into place if oriented correctly 25mm apart (similar to the pegboard click)

**[Vertical Bin](https://than.gs/m/999446) Mounting**
This was made to be used for  these [bins and sleeves](https://than.gs/m/999446)
in order to mount these bins or other items without the multiboard threads, you'll need a small thread nut: [link](https://thangs.com/search/%22MB84%22%20creator%3A%22Keep%20Making%22?scope=thangs&view=list)

Pegboard Click T-Bolts for Multiboard

Small Thread Pegboard Click Adapter-5mm.stl

Small Thread Pegboard Click Adapter-6mm.stl

Small Thread Pegboard Click Adapter-7mm.stl

Small Thread Pegboard Click Adapter-8mm.stl

Small Thread Pegboard Click Adapter-9mm.stl

Small Thread Pegboard Click Adapter-10mm.stl

Small Thread Pegboard Click Adapter-13mm.stl

Small Thread Pegboard Click Adapter-20mm.stl

Small Thread Pegboard Click Adapter-30mm.stl

**Parametric Vertical Mounted Multiboard Bins** 
 
_Update: I tried updating this  with all 512 preconfigured bin sizes and styles and he page lagged out. so I've left 3 sample files as the preview models and attached everything else including the fusion 360 file in a zip file instead. this page is still giving me errors though so i've added a backup on [printables](https://www.printables.com/model/744258-parametric-vertical-mounted-multiboard-bins/files)_

_Update 2: I Updated the Parametric file since there was an issue with the offsets moving the mounting points away from the center_

A parametrized F3D file for you to generate your own custom bins as well as an assortment of preconfigured ready-to-print bins and sleeves for your multiboard
- Files are named for their dimension sizes X,Y, and Z
- Pre-configured models range from size 1-4 for each dimension
- if you need bigger/custom sizes use the f3d file to generate one
- a size is a multiple of 25mm ( a 3x2x4 bin is 75mm wide, 50 mm long, and 100mm high)
There are 2 main types of files Bins (with bottoms) and Sleeves (no bottoms).
(see attached pictures) as well as  4 included styles  (Sharp Corners, Chamfered, Front Dip, and Hex)

need to holster something with a long handle like a hammer, pliers or a wrench? use a sleeve (no bottoms)
Just need a quick box to hang up a tool use a sharp corner or chamfered bin
Need to see the top of whatever it is you're storing? use a Front Dip Bin 
Need to see inside the box? use a hex bin

**Print Settings**
Regular bins: 15% Infill, 3 walls, No supports
Hex Pattern bins: 15% Infill, 3 walls, Supports needed for horizontal overhangs at the top of the model (or change the hex pattern to be smaller)

**Mounting**
This was primarily designed for use with Multiboard and "small thread" bolts. I personally use [13mm Small Thread T Bolts ](https://thangs.com/designer/Keep%20Making/3d-model/20%20mm%20Small%20Thread%2C%20Plain%20Head%2C%20T-Bolt-973957) which conveniently fits in the rectangular cutout for easy mountng and unmounting. That said any small thread bolts will do. 
**_Updated Mounting_**
Pegboard Clicks: https://than.gs/m/999811 (my favorite so far)
Push Fit: https://than.gs/m/999815
[MultiConnect](https://www.printables.com/model/716558-multiconnect-generic-connector-for-your-board):  https://www.printables.com/model/746508-multiconnect-adapter (best for easy removal and re-mounting)

There is also a MountingTolerance parameter (default 0.1mm for my printer tolerance) which can be changed to suit your printer settings if you need a more flush, loose, or tighter fit on your bolts

**Makes**
Please do upload makes! i'd love to see if anyone will find this useful :) 

**Cross Compatibility**
There is an option to change the hole size on the mounting point, the base  dimension size (default 25mm for multiboard) and other mounting options on the F3D file which should allow you to mount this on other surfaces like a standard 1-inch spaced pegboard from your hardware store (change base to a multiple of 25.4mm). 
If using bigger bolts, make sure to change the OffsetX and OffsetZ Parameters to a sufficiently large value to allow you to fit both the hole and the bolt/peg you're using. By default, mounting point hole centers are 12.5mm away from each corner

**The F3D File**
The F3D file takes in as parameters X Y and Z dimensions as well as if the bin is bottomless (1) or not (0)
_Open the file in Fusion 360 > head to Design > Modify > Change Parameters_

There are also  other parameters that allow you to change  mounting hole angle orientation, wall thickness, front wall dip, front edge chamfers, mounting point thickness, etc. (play around with the settings and see which you like)

**Custom Sizes**
- you can change X Y Z params to get a bin size  that's a multiple of  the base measurement (default 25). You can also get custom bin sizes by changing the OffsetX, OffsetY, OffsetZ Params 
  - i.e. for an 86x27x72 bin just do X:3, Y:1, Z:2, OffsetX: 11, OffsetY:2, OffsetZ: 22
  - Negative numbers will work for the size but will cause the mounting holes to not line up.
- You can also change the Thickness parameter to change the wall width. Default is 3mm 



Vertical Mounted Multiboard Bins and Sleeves © 2024 by FinntasticG is licensed under CC BY-NC-SA 4.0 

Parametric Vertical Mounted Multiboard Bins (repost)

Chamfered 3x2x3 bin.stl

Sharp Corner 3x2x3 sleeve.stl

Hex 3x4x3 bin.stl

Front Dip 3x3x3 bin.stl

Remix of 8 mm, Dual T Mounting Offset Snap - DS Part A by Keep Making

8 mm, Command Strip Dual T Mounting Offset Cross Snap - DS Part A

Remix of 8 mm, Dual T Mounting Offset Snap - DS Part A by Keep Making

Update: 
Official command strip offset mounts for multiboard are out: https://www.multiboard.io/parts-library/mounting-systems#:~:text=Command%20Strip%20Mounts
The offsets for any boards you mounted with these should still match the official 8mm offset ones so no need to reprint anything if you already used these

8 mm, Command Strip Dual T Mounting Offset Snap - DS Part A

8mm offset command strip mount Part A double center.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

finntasticg

Achievements

Seedling

Voyager