Erwin B

Spiraled Christmas Tree by Slimprint

by
Slimprint
Follow
Follow
Remix Model
Slimprint
Slimprint
|
Image 2 of 2
Spiraled Christmas Tree by Slimprint 3d model
Slimprint
Slimprint
|
Image 2 of 2
Spiraled Christmas Tree by Slimprint 3d model
2D
3D
Makes
Spiraled Christmas Tree by Slimprint 3d model
Spiraled Christmas Tree by Slimprint 3d model
This model is restricted by licensing terms. 

This Spiraled Christmas Tree is the perfect way to get your home in the Christmas spirit. It's a quick and easy-to-print model that will add some holiday cheer to any room.

The Christmas Tree consists of 2 parts.

The base of the spiral tree is designed to be printed in vase mode (aka spiral vase in PrusaSlicer and spiralized outer contours in Cura).

The tree topper is divided into two halves that can be attached to each other with glue after printing. The halves have to be printed with the flat side facing the build plate.

Size: 11.7 x 20.5 (with tree topper) Scale as you like :) Weight: 50 - 150 grams Print time: Base - 2.5 - 5 h Tree topper: 15 - 30 min

Happy printing & Merry Christmas!

3D printing settings

Base Nozzle size: 0.4 (preferably larger) Layer height: 0.2 - 0.4 mm Layer width: 0.6 - 1.2 mm Print speed: 30 - 40 mm/sec Tip: Print hot (+5 +10 degrees) for improved layer adhesion Vase mode enabled for the base

Tree Topper 2 - 3 perimeters 10% infill Vase mode DISABLED


20 Likes75 DownloadsDecember 9, 2023


20 Likes75 DownloadsDecember 9, 2023
This model is restricted by licensing terms.