INCEPTION MAGNETIC ROTOR

Are we dreaming?

Well.. now you have a way to check it with this awesome look alike inception totem. Similar style to the one used in the film!!

This one is designed to be a little Fidget to have on the desktop and make it spin endless times. It has an incorporated magnet (one at the base and another one at the totem) so it stays on the same spot while spinning. No one will know about the magnets, trust me ;)

It also works on any other surfaces if you do not want to use the base provided.

IMPORTANT: If you are not using a Bambulab Printer use the files with NO_PAUSES name. It seems that Cura slicer does not open the files with the pause setting.

Any question regarding the model can be sent to my Instagram: https://www.instagram.com/printplay.3d/ :)

Recommended settings:

-For this print it is recommended the use of magnets for weight and stability for the rotation of the totem. This print uses two 10x3 mm magnets for the base and the totem. The STLs have the pauses incorporated so you can add the magnet mid print and let the print continue to hide them!

-NO SUPPORTS NEEDED FOR ANY PART!

-MODEL IS SCALABLE but keep in mind the gaps for the magnets!!

-Adhesion: Nothing is needed.

-Layer height: 0,2 mm is more than enough

-Infill: 10 % is more than enough