A Rack to hold standard 35mm film cannisters. I use these to store my small parts used in locksmithing and other items, These are multi-board compatible. I use command strips to mount them or you can use wall anchors or pegboard pins if you desire.

35mm Film Cannister Holder

35mmx5 Film Cannister Holder.stl


A Bird feeder compatible with Ring Camera. Printed in ASA, I use 18.5mm and 23 mm watch glasses purchased on Amazon for the round window glass. This improved model allows for the turret roof to be lifted off to fill feeder. Print with supports as required. The Original Version remains available to subscribers in the event you want to  reprint a part.

Ring Camera Bird Feeder V2

Tray.stl

A Bird feeder compatible with Ring Camera. Printed in ASA, I use 18.5mm and 23 mm watch glasses purchased on Amazon for the round window glass. Print with supports as required. 
**This is an older model and is made available so subscribers can reprint if they need to. Please see my main page for the latest version.

Ring Camera Bird Feeder Rev 1

Cottage Core.stl

A phone mount for your Mini Cooper deigned to sit on the dash. Printed in ABS. I attached with 3M adhesive pads designed for phone mounting from Amazon (pop-tech is one vendor). This gets the phone up where you can use it , but not in the line of sight. My mini is left hand drive but, you can mirror the file in your slicer to print on either side of the dash.

Mini Cooper R50, R52 and R53 Phone Holder

Dash Mount.stl

Drawer Slide Bracket for Mastercraft An Elkay Kitchen Drawer. Prototyped in PLA, executed in Nylon. No need for annealing. For best strength print horizontally, for best finish print vertically.

Mastercraft Drawer Bracket

Mastercraft Drawer Bracket.stl

A hummingbird feeder with Ring Camera that uses feeder cups found on amazon

([https://www.amazon.com/Honeydak-Handheld-Hummingbird-Feeders-Supplies/dp/B0B1T79YBL/ref=sr_1_5?crid=VB9PIA65JHKT&dib=eyJ2IjoiMSJ9.UmX5dPaVRvLpqD7i1FQ3-XYWdkzDriWjbRaBydEzT6S0_UREbn69mJN83xmuHANuRCj2avlWRAB_oSXoGMK9KMtfL7rQlvlhaRnE0S9YRvmu722_1MH5zVXnbvyKPe1c-KpHZCiU1lAJvlDYbSN6WaorwH8sNnpX5cz5FcK1ymoY1SwLddKmHRpBL7_rLjhqaFJfPJ9zDK0afGrj_Wl7-ijsCSMhpfvHVObx_O-0Ka2QI0Xc_TLGrw1AF68jmmcjKfSeboDskh-2wEmYkZFuvfLy_8xHHexaCdVQS5cke5E.6d9XPuUrQ2RAw14yrJXYhwQGs0A6g0yNrUopBCy-zGU&dib_tag=se&keywords=hummingbird%2Bfeeder%2Bcups&qid=1723501659&sprefix=hummingbird%2Bfeeder%2Bcups%2Caps%2C100&sr=8-5&th=1])



Ring Camera Hummingbird Feeder

Hummingbird.stl

A mount for your infrared thermometer. Use small bolts for mounting on Multiboard and the washers if you want to mount to a wall.

Multiboard or Wall Mount  IR Thermometer Holder

Thermometer Mount.stl

A Clip and base for mounting a 40mm thick flashlight to a Wall. May be mounted to a wall directly or mounted to a Multiboard tile using small bolts. The clip is normally sufficient for most flashlights or, you can include the base if you have a particularly heavy specimen.

40mm Flashlight Clip - Multiboard Compatible

40mm Flashlight Base.stl

A bird feed for Ring Camera in the style of a garden shed. Printed in ASA.

For best results:
1) Print the Body upside down. 
2) Window Backs should be printed vertically for the strongest snap tabs, otherwise you can print them horizontally and simply depend upon glue.
3) I assemble the body, windows and base and then apply a dot of CA at corners to assure strength.
4 Glue roof to Facade and it friction fits to the lower assembly for filling.

Ring Bird Feeder - Garden Shed

Base.stl

Body.stl

A woodcut style Key Hanger with a stylized magnolia tree

Magnolia Key Hanger

Magnolia.stl

A simple wall or window mountable bird feed for Ring Cameras

Ring Camera Bird Feeder

Base2.stl

A cover for your pool that prevents pool robots from getting stuck on the drain. When a robot hits the cover, it tips up and forces at least one track or wheel to get sufficient grip so that it does not high-center.

You can print in PLA or ABS. I use the clips to hold the parts together when using PLA, and Bolts for ABS. You can use either clips, tie-wraps or weights to hold it in place. I prefer using a ten pound weight I picked up from Amazon 

Pool Robot Drain Cover

Drain Cover Base_V2.stl

A simple necklace hanger in a cast iron style.

Necklace Hanger

Necklace Hanger.stl

A simple bottle holder for common medicine bottle size (50mm). Mount to board with small screw.

Multiboard Medicine Bottle Holder

50mm Simple Bottle holder.stl

The right size for medicine bottles, this is a holder that you can stack high, lay vertically or mount to Multi-Board Pegboards using Multi-connect connector. It also includes mounting a keyhole to mount directly to the wall if you choose. If none of these appeal to you, simply place a dot of CA In the mating surfaces for a secure stack. I print with 5% in-fill.

Be careful. This is a highly detailed cut pattern. Depending upon your printer, if you print with supports, you may have difficulty removing supports and getting a clean image. I have best luck printing fine quality and slowly.

50mm Stackable, Multiboard Mountable Bottle Holder Humming Bird Cut Pattern

50mm_Large_hummingbird_cut.stl

The right size for medicine bottles, this is a holder that you can stack high, lay vertically or mount to Multi-Board Pegboards using Multi-connect connector. It also includes mounting a keyhole to mount directly to the wall if you choose. If none of these appeal to you, simply place a dot of CA In the mating surfaces for a secure stack. I print with 5% in-fill.

50mm Stackable, Multiboard Mountable Bottle Holder Humming Bird Inset

50mm_hummingbirds.stl

50mm Stackable Multiboard Mountable Bttle Holder Cut Pattern

50mm Cut.stl

Unlike other options which have damaged my paint (see photo) this mount for door jambs uses command strips for adhesion. The camera is offset enough to be able to home itself with out interference.. I use it to monitor print jobs at a glance day or night.

Ring Door Jamb Mount_v2

Ring Door Jamb Mount_v2.stl

I use this to store everything from engine assembly lube to PVC Glue Cans to Aspirin, This is a bottle holder that you can stack high, lay vertically or mount to Multi-Board Pegboards using Multi-connect connector. It also include mounting holes to mount directly to the wall if you choose. If none of these appeal to you, simply place a dot of CA In the mating surfaces for a secure stack. I print with 5% in-fill. 

I use this for PVC cement cans, assembly lube, brake grease, rubber cement, even aspirin and have finally gotten things out of boxes all over the place and organized in one place.

Stackable Multiboard Mountable Bottle Holder

Bottle Rack.stl

A collection of trays for storing both standard and deep 3/8 ths sockets with pockets for installing 3x10mm magnets which are readily available on Amazon and elsewhere. no need to pause prints, simply insert the magnet(s) after printing and plug them with the provided plugs.

These don't need to be strong. I print with 3-5% infill
Depending upon the magnets you choose, these are strong enough to stay in place  without issue, but if you want to tie the various groups together like I do, a simple dot of CA wicked into mating surfaces allows you to create pallets of sockets.

1/2" Drive Magnetic Modular Socket Trayss

1_2 34x89.stl

3/8 inch drive magnetic modular socket trays

3_8 24x78.stl

Overlays for glasses in the Coraline Style

Button Eyes

Button Eyes.stl

Thor's Printshop provides an inventory of print models to organize your Garage, House, Forge and life with one-off and on-demand designs. Additionally you will find random models for stuff the family wants.

Ogrevikingthorpe

Achievements

Voyager

Seedling

Pinned models

Magnolia Key Hanger

Ring Bird Feeder - Garden Shed

Ring Camera Hummingbird Feeder

Ring Camera Bird Feeder V2

35mm Film Cannister Holder

Ring Camera Bird Feeder V2

Ring Camera Bird Feeder Rev 1

Mini Cooper R50, R52 and R53 Phone Holder

Mastercraft Drawer Bracket

Ring Camera Hummingbird Feeder

Multiboard or Wall Mount IR Thermometer Holder

40mm Flashlight Clip - Multiboard Compatible

Ring Bird Feeder - Garden Shed

Magnolia Key Hanger

Ring Camera Bird Feeder

Pool Robot Drain Cover

Necklace Hanger

Multiboard Medicine Bottle Holder

50mm Stackable, Multiboard Mountable Bottle Holder Humming Bird Cut Pattern

50mm Stackable, Multiboard Mountable Bottle Holder Humming Bird Inset

50mm Stackable Multiboard Mountable Bttle Holder Cut Pattern

Ring Door Jamb Mount_v2

Stackable Multiboard Mountable Bottle Holder

1/2" Drive Magnetic Modular Socket Trayss

3/8 inch drive magnetic modular socket trays

Button Eyes