A woodcut style Key Hanger with a stylized magnolia tree

Magnolia Key Hanger

Magnolia.stl

A simple wall or window mountable bird feed for Ring Cameras

Ring Camera Bird Feeder

Base2.stl

A cover for your pool that prevents pool robots from getting stuck on the drain. When a robot hits the cover, it tips up and forces at least one track or wheel to get sufficient grip so that it does not high-center.

You can print in PLA or ABS. I use the clips to hold the parts together when using PLA, and Bolts for ABS. You can use either clips, tie-wraps or weights to hold it in place. I prefer using a ten pound weight I picked up from Amazon 

Pool Robot Drain Cover

Drain Cover Base_V2.stl

A simple necklace hanger in a cast iron style.

Necklace Hanger

Necklace Hanger.stl

A simple bottle holder for common medicine bottle size (50mm). Mount to board with small screw.

Multiboard Medicine Bottle Holder

50mm Simple Bottle holder.stl

The right size for medicine bottles, this is a holder that you can stack high, lay vertically or mount to Multi-Board Pegboards using Multi-connect connector. It also includes mounting a keyhole to mount directly to the wall if you choose. If none of these appeal to you, simply place a dot of CA In the mating surfaces for a secure stack. I print with 5% in-fill.

50mm Stackable, Multiboard Mountable Bottle Holder Humming Bird Inset

50mm_hummingbirds.stl

50mm Stackable Multiboard Mountable Bttle Holder Cut Pattern

50mm Cut.stl

The right size for medicine bottles, this is a holder that you can stack high, lay vertically or mount to Multi-Board Pegboards using Multi-connect connector. It also includes mounting a keyhole to mount directly to the wall if you choose. If none of these appeal to you, simply place a dot of CA In the mating surfaces for a secure stack. I print with 5% in-fill.

Be careful. This is a highly detailed cut pattern. Depending upon your printer, if you print with supports, you may have difficulty removing supports and getting a clean image. I have best luck printing fine quality and slowly.

50mm Stackable, Multiboard Mountable Bottle Holder Humming Bird Cut Pattern

50mm_Large_hummingbird_cut.stl

Unlike other options which have damaged my paint (see photo) this mount for door jambs uses command strips for adhesion. The camera is offset enough to be able to home itself with out interference.. I use it to monitor print jobs at a glance day or night.

Ring Door Jamb Mount_v2

Ring Door Jamb Mount_v2.stl

I use this to store everything from engine assembly lube to PVC Glue Cans to Aspirin, This is a bottle holder that you can stack high, lay vertically or mount to Multi-Board Pegboards using Multi-connect connector. It also include mounting holes to mount directly to the wall if you choose. If none of these appeal to you, simply place a dot of CA In the mating surfaces for a secure stack. I print with 5% in-fill. 

I use this for PVC cement cans, assembly lube, brake grease, rubber cement, even aspirin and have finally gotten things out of boxes all over the place and organized in one place.

Stackable Multiboard Mountable Bottle Holder

Bottle Rack.stl

A collection of trays for storing both standard and deep 3/8 ths sockets with pockets for installing 3x10mm magnets which are readily available on Amazon and elsewhere. no need to pause prints, simply insert the magnet(s) after printing and plug them with the provided plugs.

These don't need to be strong. I print with 3-5% infill
Depending upon the magnets you choose, these are strong enough to stay in place  without issue, but if you want to tie the various groups together like I do, a simple dot of CA wicked into mating surfaces allows you to create pallets of sockets.

1/2" Drive Magnetic Modular Socket Trayss

1_2 34x89.stl

3/8 inch drive magnetic modular socket trays

3_8 24x78.stl

Overlays for glasses in the Coraline Style

Button Eyes

Button Eyes.stl

Thor's Printshop provides an inventory of print models to organize your Garage, House, Forge and life with one-off and on-demand designs. Additionally you will find random models for stuff the family wants.

Thor's PrintShop

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Ogrevikingthorpe

Select a membership plan