AMS not required, manual swaps work great with this print, although an AMS is helpful with Filament Painting projects

3mf and stl included

Filaments used in example: Polymaker Charcoal Black PLA Bambu Labs White PLA Basic HP3D Red PLA+ ESUN Blue PLA+ 3D printing settings

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Swap Instructions: Start with Charcoal Black At layer #7 (0.4mm) swap to Red At layer #19 (0.88mm) swap to Dark Blue At layer #27 (1.2mm) swap to Jade White for the rest.