Monochrome Miata Magnet

AMS not required, manual swaps work great with this print, although an AMS is helpful with Filament Painting projects.

Filaments Used: PLA PolyTerra Charcoal Black PLA PolyLite Grey PLA BambuLab Basic Jade White 3D printing settings

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Swap Instructions: Start with Charcoal Black At layer #8 (0.72mm) swap to Grey At layer #12 (1.04mm) swap to Jade White for the rest.