Monochrome G37 Magnet

AMS not required, manual swaps work great with this print, although an AMS is helpful with Filament Painting projects

3mf and stl included

Filaments Used: PLA PolyTerra Charcoal Black PLA PolyLite Grey PLA Creality Hyper White 3D printing settings

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

Swap Instructions: Start with Charcoal Black At layer #4 (0.48mm) swap to Grey At layer #9 (0.88mm) swap to White for the rest.