AMS not required, manual swaps work great with this print, although an AMS is helpful with Filament Painting projects
This picture was hand drawn and printed using HueForge. If you have any questions or need support, feel free to reach out on my new community Discord for members only!
Stl and 3mf file included
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
The Model is 160x120mm in size You may print at higher layer heights below the Min Depth of 0.76mm The Max Depth is 2.3mm and the Actual Depth is 2.4mm
Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Polyterra Dark Grey Transmission Distance: 0.5 PLA PolyLite White Transmission Distance: 5 This print uses 3 unique filaments
Swap Instructions: Start with Black At layer #10 (0.92mm) swap to Dark Grey At layer #15 (1.32mm) swap to White for the rest.
If you like what I do feel free to follow and check out my social media pages to stay up to date with whats coming next!