Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA Sunlu Meta Grey Transmission Distance: 2.8 PLA BambuLab Basic Jade White Transmission Distance: 5.7

Swap Instructions: Start with Charcoal Black At layer #10 (0.88mm) swap to Grey At layer #13 (1.12mm) swap to Jade White At Layer #20 (1.68mm) swap to Charcoal Black At layer #22 (1.84mm) swap to Grey At layer #26 (2.16mm) swap to Jade White for the rest