Monochrome Challenger Magnet

AMS not required, manual swaps work great with this print, although an AMS is helpful with Filament Painting projects

This picture was hand drawn digitally and printed using HueForge.

Stl and 3mf file included

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA Sunlu Meta Gray Transmission Distance: 2 PLA PolyLite Grey Transmission Distance: 1.1 PLA BambuLab Basic Jade White Transmission Distance: 5.7

Swap Instructions: Start with Charcoal Black At layer #13 (1.12mm) swap to Gray At layer #18 (1.52mm) swap to Grey At layer #21 (1.76mm) swap to Jade White for the rest.