AMS not required, manual swaps work great with this print, although an AMS is helpful with Filament Painting projects
3mf and stl included
Filaments Used: PLA PolyTerra Charcoal Black PLA PolyLite Grey PLA BambuLab Basic Jade White 3D printing settings
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Swap Instructions: Start with Charcoal Black At layer #6 (0.56mm) swap to Grey At layer #10 (0.88mm) swap to Jade White for the rest.
.png&w=3840&q=75)
