Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA Sunlu Meta Gray Transmission Distance: 2.8 PLA BambuLab Basic Blue Gray Transmission Distance: 2.6 PLA PolyLite Grey Transmission Distance: 1 PLA BambuLab Basic Jade White Transmission Distance: 5.7

Swap Instructions: Start with Charcoal Black At layer #10 (0.52mm) swap to Gray At layer #23 (1.04mm) swap to Blue Gray At layer #29 (1.28mm) swap to Grey At layer #40 (1.72mm) swap to Jade White for the rest.