This picture was hand drawn and printed using HueForge. The HueForge snaps into the printable Frame included. Recommended to print the Frame at 100% infill. If you have any questions or need support, feel free to reach out on my new community Discord!

Stl and 3mf file included for both the Frame and the Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA Polyterra Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 2.8 PLA Creality Hyper Red Transmission Distance: 3.4 PLA BambuLab Basic Jade White Transmission Distance: 5.7

Swap Instructions: Start with Black At layer #20 (1.68mm) swap to Blue At layer #23 (1.92mm) swap to Red At layer #27 (2.24mm) swap to Jade White for the rest.