This picture was hand drawn and printed using HueForge. The HueForge snaps into the printable Frame included. Recommended to print the Frame at 100% infill. If you have any questions or need support, feel free to reach out on my new community Discord!
Stl and 3mf file included for both the Frame and the Hueforge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used: PLA Polyterra Black Transmission Distance: 0.3 PLA Polylite Dark Blue Transmission Distance: 0.5 PLA Panchroma Celestial Purple Transmission Distance: 5.7 PLA BambuLab Jade White Transmission Distance: 5.0 PLA Panchroma Translucent Yellow Transmission Distance 9.0
Swap Instructions: Start with Black At Layer #27 (2.24) swap to Dark Blue At Layer #29 (2.4) swap to Purple At Layer #33 (2.72) swap to White At Layer #35 (2.88) swap to Yellow for the rest