tracking pixel
Daniel A

Dark Side of the Moon

by
NeoKoi Prints
Follow
Follow
Remix Model
NeoKoi Prints
NeoKoi Prints
Image 1 of 3
Dark Side of the Moon 3d model
2D
3D
Makes
Dark Side of the Moon 3d model
Dark Side of the Moon 3d model
Dark Side of the Moon 3d model
10 Likes39 DownloadsJuly 6, 2024


Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size The Max Depth is 2.2mm and the Actual Depth is 2.3mm ** Filaments Used:** PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Purple Transmission Distance: 0.5 PLA Polylite Aqua Blue Transmission Distance: 3.8 PLA PolyTerra Forest Green Transmission Distance: 0.5 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA PolyLite Wine Red Transmission Distance: 1 PLA BambuLab Basic Jade White Transmission Distance: 5.7 This print uses 8 unique filaments

Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Purple At layer #7 (0.64mm) swap to Aqua Blue At layer #9 (0.8mm) swap to Forest Green At layer #12 (1.04mm) swap to Savannah Yellow At layer #17 (1.44mm) swap to Sunrise Orange At layer #19 (1.6mm) swap to Wine Red


10 Likes39 DownloadsJuly 6, 2024




10 Likes39 DownloadsJuly 6, 2024