Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5.7 PLA Chrominal Serpent Green Transmission Distance: 7.9 PLA Polyterra Sky Blue Transmission Distance: 1.4 PLA PolyLite Purple Transmission Distance: 0.5 PLA PolyLite Magenta Transmission Distance: 1.9 PLA PolyTerra Cotton White Transmission Distance: 1.5 This print uses 8 unique filaments
Swap Instructions: Start with Black At layer #18 (0.84mm) swap to Blue Gray At layer #23 (1.04mm) swap to Jade White At layer #26 (1.16mm) swap to Black At layer #27 (1.2mm) swap to Serpent Green At layer #28 (1.24mm) swap to Sky Blue At layer #31 (1.36mm) swap to Purple At layer #34 (1.48mm) swap to Magenta At layer #39 (1.68mm) swap to Cotton White for the rest.
If you like what I do feel free to follow and check out my social media pages to stay up to date with whats coming next!