For a 60mm round cutout in an 18mm thick horizontal or vertical surface. Also [available for 62mm cutout](https://thangs.com/designer/MihaiDesigns/3d-model/Cable%20desk%20grommet%2062mm-918571?manualModelView=true&source=Recent).
Multiple assembly combinations possible: flat, turret, mushroom.

Message me on Discord for other sizes or improvement ideas.

Cable desk grommet 60mm

Desk grommet 60mm assembly preview.stl

Updated transition model for my extruder test to detect a range of issues in a single print (the preview above is broken). For details see my [inconsistent extrusion articles](https://mihaidesigns.com/inconsistent-extrusion/).

PrusaSlicer and Bambu Studio files with all custom settings provided for easier printing. Do keep all settings when switching to another printer profile.

Further discussions on Discord.

Extruder test transition

Extruder test transition PrusaSlicer.3mf

For a 62mm round cutout in an 18mm thick horizontal or vertical surface. Also [available for 60mm cutout](https://thangs.com/designer/MihaiDesigns/3d-model/Cable%20desk%20grommet%2060mm-919354?manualModelView=true&source=All+Files).
Multiple assembly combinations possible: flat, turret, mushroom.

Message me on Discord for other sizes or improvement ideas.

Cable desk grommet 62mm

Desk grommet 62mm assembly preview.stl

For easy mixing of tea cream without spilling. Requires an Ikea $3 battery-powered milk frother and a small Ikea fork (Dragon dessert fork). The fork prevents the liquid from rotating too fast and spilling over the cup. The printed part doesn't come into contact with the liquid.


For 3D printing, I recommend using dry PETG printed at a higher temperature for better layer adhesion.


**Assembly** requires a bit of force to insert the frother and the fork. Pay attention not to break the print or cause injury.


Let me know on the Discord server if you have improvement ideas for the design.


Disclaimer: you are responsible for any damage or injury caused by using this model.

Ikea milk frother adapter

For easy mixing of tea cream without spilling.

Requires an Ikea milk frother and a small Ikea fork.

For 3D printing, I recommend using dry PETG printed at a higher temperature for better layer adhesion.

**Assembly** requires a bit of force to insert the frother and the fork. Pay attention not to break the print or cause injury.

Let me know on the Discord server if you have improvement ideas for the design.

Disclaimer: you are responsible for any damage or injury caused by using this model.

Learn and develop your design and 3D printing skills
- Download up to 10 paid models per month
- Private Discord access to Superfan Group
- How to design (Live, Q&amp;As)
- Project polls
- All benefits in the previous tier

Superfan 😍

Instant access to everything
- Unlimited downloads
- Private Discord access to Superfan Group
- All benefits in the other tiers

To the Moon! 😎

Interact with an awesome group of 3D printing enthusiasts
- Download up to 4 paid models per month
- Private Discord access to Live Group
- Early access to beta STLs and some dev files
- Live Q&amp;As
- Exclusive project updates
- Early access to most long-form YouTube videos
- My everlasting gratitude 🧡

Live 😃

3D printed AMS stacking stand. Fits the Bambu Lab AMS (for P1P and X1 series 3D printers)

> [Quick presentation video](https://www.youtube.com/shorts/__9SEiFJhKI)

**Compatibility (updated)**
Fits the 3 different versions of the AMS units. However, the fit for the older version (3 large gaps on the sides instead of 4) is slightly offset and the bottom box will protrude out a bit.

**Materials**
- about 500g of filament
- optional 10x404mm metal rod/pipe (such as an aluminum pipe) cost me about $2 at the hardware store
- optional two M3 grub screws 6-12mm long and compatible Allen (hex) key (you can find them in sets on Amazon for $10-20), OR use long normal M3 screws, like M3x30 or M3x40 and only screw in a quarter of the length
- optional felt pads for the bottom AMS unit for easier sliding

**Printing**
There's an optional small test-fit part that can be printed first for checking potential fitting issues. Let me know so I can add more files with different clearances or different rod diameters.
Pick either the decorated version or the plain version. 2 files need to be printed and they are pre-oriented, no supports required.
I prefer PETG, 2 perimeters, 12% cubic infill, and a good amount of brim. Takes close to 15 hours to print with the Generic PETG profile.

**Assembly**
Cut the metal rod to 404mm long, then insert it in both printed parts.
Fit the AMS unit at the top.
Screw in the two grub screws at the back alongside the rod to lock it in place.

If you like CAD modeling, I posted a [90-minute video with the entire workflow for creating this model](https://youtu.be/lQgtJk67J3Q).

Licensed under [CC BY-NC-SA 4.0](https://creativecommons.org/licenses/by-nc-sa/4.0/) (in short: you may use, adapt, and share these files non-commercially with attribution and under this same license).

AMS stacking stand for Bambu Lab P1P and X1 #ThangsBambuContest

AMS Stand 10mm rod - test fit part.stl

AMS Stand 10mm rod - decorated left.stl

AMS Stand 10mm rod - decorated right.stl

AMS Stand 10mm rod - plain left.stl

AMS Stand 10mm rod - plain right.stl

Desk grommet 62mm front.stl

Desk grommet 62mm back.stl

Desk grommet 62mm cover.stl

Desk grommet 62mm turret.stl

Desk grommet 62mm mushroom.stl

Extruder test transition Bambu Studio.3mf

Join my awesome group and let me help you enhance your 3D printing skills!
Use code AWESOME for 50% off the first month!

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

<div class="markdown"><p>Join my awesome group and let me help you enhance your 3D printing skills!
Use code AWESOME for 50% off the first month!</p></div>

MihaiDesigns

Pinned models

AMS stacking stand for Bambu Lab P1P and X1 #ThangsBambuContest

Cable desk grommet 62mm

Extruder test transition

Cable desk grommet 60mm

Extruder test transition

Cable desk grommet 62mm

Ikea milk frother adapter